Bitcoin Mining Calculator CoinWarz

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Hulk.Finance: A Combination of DeFi and High Frequency Trading

DeFi continues to push the limits of blockchain technology. Whether its staking a native token for a second token from the same ecosystem, locking liquidity for an eternity to promote liquidity providing and the benefits of locking tokens, or simply creating new tokenomics that can be tested and studied, DeFi is exploring all avenues to produce the next breakout token such as YFI. Hulk.finance has stepped in to do just that.

Hulk.finance (Contract Address: 0xE1f8CD01aB04b51d02C6fb2BCA61B03fB5e33B99**)** is an ERC20 token which plans to utilize a DAO (Decentralized Autonomous Organization) format that will be community governed in order to promote high frequency trading in a manner only DeFi can bring to the table. As stated on their website, “Our project connects a high-yield partner HFT (High Frequency Trading) fund that has successfully worked from the beginning of 2020 and has year-to-date yields of more than 40%. The fund size is more than 70 millions USD and they operate on several cryptocurrency exchanges like Binance and Bithumb with their API robots. What is good — automated trading does not require continuous uptrend of the Bitcoin price. We have seen good results during Bitcoin breakouts and breakdowns. We want to have the same yields from our investments. But there is a problem — they work with an entrance barrier of 1,000,000 USDT, like many private banking services or high-yield ETFs. Our basic idea is to make a kind of DeFi staking pool and put it under the management of the HFT fund. We will develop all infrastructure for connecting finance flows, deposits, and withdrawals.

The HULK total supply is 100,000 Tokens. Distribution breakdown is as follows:

The project is new but already has a road-map to help guide their lofty ambitions. The first step begins with the formation of the pre-sale and Liquidity pool on Uniswap which is currently ongoing. Secondly, they will distribute Hulk tokens via staking farms. As described in their website they “will run staking farms for farming 80,000 HULKs*. You will need to stake appropriate tokens on the selected farms to get your share of rewards in HULKs. Farm 1 will farm rewards of 60,000* HULKs within 15 days, staking token — ETH-HULK LP Uniswap V2. Farm 2 will farm rewards of 10,000 HULKs within 15 days, staking token — USDN. Farm 3 will farm rewards of 10,000 HULKs within 15 days, staking token — Token Y. Token Y will be announced prior to the farms’ launch. Genesis farming time will be 15 days, after that farming rate will be settled on the level of 15th day. We implement halving every three days, so early farmers will get more HULKs. View on Etherscan. In order to support the price of the token from dumping, we will take a 5% commission for the sale of tokens, when holders sell it on Uniswap, burn 4% and add 1% to the community grants account. The burnt amount will be added to farming pools after 15 days of initial farming. So, for example, if someone sold 20,000 HULKs, we will take 1,000 tokens, burn 800 of them and they will be re-minted on day 16. 200 tokens will be sent to the community grants address. The total supply is 100,000 tokens.”

The third step includes the staking pool. The staking pool will be open for everyone on the following terms and conditions.


Funds from the staking pool will be transferred to the HFT fund for trading operations.

Lastly, the Vault concept is descriptive. “We want to share revenue from HFT fund among HULK holders that stake their tokens in HULK Vault. HFT fund will send revenue from its operation once a month, on the first day of the following month. Current concept: Monthly revenue from HFT operations will be shared between HULK tokens staked in the vault according to the time of staking divided on 720 hours. Example: You stake your 500 HULK tokens in Vault for 20 days (480 hours). Your HULK/hours equal to 500*480=240,000. Total HULK/hours in Vault in this month — 60,000,000. Your share in this month = 0,4%. HFT fund has earned 4% on staking pool funds this month. After payout of their 1,25% (15%/12) per month to USDT stakers, the remaining part is 10,000,000 USDT x 2,75% = 275,000 USD. Your profit share 0.4% of 275,000 = 1100 USDT will be sent as USDT to your address, connected with a Vault.”

All of the above described by the tokens creators seems very complicated, but many tokens are already trying to accomplish this without access to an already built fund which can execute trades on a daily basis. Also due in part is the projects commitment to becoming a DAO by allowing holders to vote on key project decisions and development to make the ecosystem more effective and manageable. Decentralization is the most trustworthy base of contract/cryptocurrency ownership. It creates a unique and secure environment free from direct outside influence due to the filter of the entire community being involved. The developers have said that the voting system for the project will be done within the first 30 days of project launch.

With lofty ambition and high expectations, the project looks to capitalize on the DeFi boom by hedging their fund against the market and giving holders a share of the pie. It will be interesting to see how successful and sustainable the project can be, but we will find out soon enough.

Pertinent Hulk.Finance Links:



(I write articles and reviews for legitimate, interesting, up and coming cryptocurrency projects. Feel free to PM me to review your project. Thank you!)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Disclaimer: This is not financial advice. The sole purpose of this post/article is to provide and create an informative and educated discussion regarding the project in question. Invest at your own risk.
submitted by Chrisc9234 to CryptoMoonShots [link] [comments]

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Public Proposal TL;DR:

Dragonchain has demonstrated twice Reddit’s entire total daily volume (votes, comments, and posts per Reddit 2019 Year in Review) in a 24-hour demo on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. At the time, in January 2020, the entire cost of the demo was approximately $25K on a single system (transaction fees locked at $0.0001/txn). With current fees (lowest fee $0.0000025/txn), this would cost as little as $625.
Watch Joe walk through the entire proposal and answer questions on YouTube.
This proposal is also available on the Dragonchain blog.

Hello Reddit and Ethereum community!

I’m Joe Roets, Founder & CEO of Dragonchain. When the team and I first heard about The Great Reddit Scaling Bake-Off we were intrigued. We believe we have the solutions Reddit seeks for its community points system and we have them at scale.
For your consideration, we have submitted our proposal below. The team at Dragonchain and I welcome and look forward to your technical questions, philosophical feedback, and fair criticism, to build a scaling solution for Reddit that will empower its users. Because our architecture is unlike other blockchain platforms out there today, we expect to receive many questions while people try to grasp our project. I will answer all questions here in this thread on Reddit, and I've answered some questions in the stream on YouTube.
We have seen good discussions so far in the competition. We hope that Reddit’s scaling solution will emerge from The Great Reddit Scaling Bake-Off and that Reddit will have great success with the implementation.

Executive summary

Dragonchain is a robust open source hybrid blockchain platform that has proven to withstand the passing of time since our inception in 2014. We have continued to evolve to harness the scalability of private nodes, yet take full advantage of the security of public decentralized networks, like Ethereum. We have a live, operational, and fully functional Interchain network integrating Bitcoin, Ethereum, Ethereum Classic, and ~700 independent Dragonchain nodes. Every transaction is secured to Ethereum, Bitcoin, and Ethereum Classic. Transactions are immediately usable on chain, and the first decentralization is seen within 20 seconds on Dragon Net. Security increases further to public networks ETH, BTC, and ETC within 10 minutes to 2 hours. Smart contracts can be written in any executable language, offering full freedom to existing developers. We invite any developer to watch the demo, play with our SDK’s, review open source code, and to help us move forward. Dragonchain specializes in scalable loyalty & rewards solutions and has built a decentralized social network on chain, with very affordable transaction costs. This experience can be combined with the insights Reddit and the Ethereum community have gained in the past couple of months to roll out the solution at a rapid pace.

Response and PoC

In The Great Reddit Scaling Bake-Off post, Reddit has asked for a series of demonstrations, requirements, and other considerations. In this section, we will attempt to answer all of these requests.

Live Demo

A live proof of concept showing hundreds of thousands of transactions
On Jan 7, 2020, Dragonchain hosted a 24-hour live demonstration during which a quarter of a billion (250 million+) transactions executed fully on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. This means that every single transaction is secured by, and traceable to these networks. An attack on this system would require a simultaneous attack on all of the Interchained networks.
24 hours in 4 minutes (YouTube):
24 hours in 4 minutes
The demonstration was of a single business system, and any user is able to scale this further, by running multiple systems simultaneously. Our goals for the event were to demonstrate a consistent capacity greater than that of Visa over an extended time period.
Tooling to reproduce our demo is available here:
https://github.com/dragonchain/spirit-bomb

Source Code

Source code (for on & off-chain components as well tooling used for the PoC). The source code does not have to be shared publicly, but if Reddit decides to use a particular solution it will need to be shared with Reddit at some point.

Scaling

How it works & scales

Architectural Scaling

Dragonchain’s architecture attacks the scalability issue from multiple angles. Dragonchain is a hybrid blockchain platform, wherein every transaction is protected on a business node to the requirements of that business or purpose. A business node may be held completely private or may be exposed or replicated to any level of exposure desired.
Every node has its own blockchain and is independently scalable. Dragonchain established Context Based Verification as its consensus model. Every transaction is immediately usable on a trust basis, and in time is provable to an increasing level of decentralized consensus. A transaction will have a level of decentralization to independently owned and deployed Dragonchain nodes (~700 nodes) within seconds, and full decentralization to BTC and ETH within minutes or hours. Level 5 nodes (Interchain nodes) function to secure all transactions to public or otherwise external chains such as Bitcoin and Ethereum. These nodes scale the system by aggregating multiple blocks into a single Interchain transaction on a cadence. This timing is configurable based upon average fees for each respective chain. For detailed information about Dragonchain’s architecture, and Context Based Verification, please refer to the Dragonchain Architecture Document.

Economic Scaling

An interesting feature of Dragonchain’s network consensus is its economics and scarcity model. Since Dragon Net nodes (L2-L4) are independent staking nodes, deployment to cloud platforms would allow any of these nodes to scale to take on a large percentage of the verification work. This is great for scalability, but not good for the economy, because there is no scarcity, and pricing would develop a downward spiral and result in fewer verification nodes. For this reason, Dragonchain uses TIME as scarcity.
TIME is calculated as the number of Dragons held, multiplied by the number of days held. TIME influences the user’s access to features within the Dragonchain ecosystem. It takes into account both the Dragon balance and length of time each Dragon is held. TIME is staked by users against every verification node and dictates how much of the transaction fees are awarded to each participating node for every block.
TIME also dictates the transaction fee itself for the business node. TIME is staked against a business node to set a deterministic transaction fee level (see transaction fee table below in Cost section). This is very interesting in a discussion about scaling because it guarantees independence for business implementation. No matter how much traffic appears on the entire network, a business is guaranteed to not see an increased transaction fee rate.

Scaled Deployment

Dragonchain uses Docker and Kubernetes to allow the use of best practices traditional system scaling. Dragonchain offers managed nodes with an easy to use web based console interface. The user may also deploy a Dragonchain node within their own datacenter or favorite cloud platform. Users have deployed Dragonchain nodes on-prem on Amazon AWS, Google Cloud, MS Azure, and other hosting platforms around the world. Any executable code, anything you can write, can be written into a smart contract. This flexibility is what allows us to say that developers with no blockchain experience can use any code language to access the benefits of blockchain. Customers have used NodeJS, Python, Java, and even BASH shell script to write smart contracts on Dragonchain.
With Docker containers, we achieve better separation of concerns, faster deployment, higher reliability, and lower response times.
We chose Kubernetes for its self-healing features, ability to run multiple services on one server, and its large and thriving development community. It is resilient, scalable, and automated. OpenFaaS allows us to package smart contracts as Docker images for easy deployment.
Contract deployment time is now bounded only by the size of the Docker image being deployed but remains fast even for reasonably large images. We also take advantage of Docker’s flexibility and its ability to support any language that can run on x86 architecture. Any image, public or private, can be run as a smart contract using Dragonchain.

Flexibility in Scaling

Dragonchain’s architecture considers interoperability and integration as key features. From inception, we had a goal to increase adoption via integration with real business use cases and traditional systems.
We envision the ability for Reddit, in the future, to be able to integrate alternate content storage platforms or other financial services along with the token.
  • LBRY - To allow users to deploy content natively to LBRY
  • MakerDAO to allow users to lend small amounts backed by their Reddit community points.
  • STORJ/SIA to allow decentralized on chain storage of portions of content. These integrations or any other are relatively easy to integrate on Dragonchain with an Interchain implementation.

Cost

Cost estimates (on-chain and off-chain) For the purpose of this proposal, we assume that all transactions are on chain (posts, replies, and votes).
On the Dragonchain network, transaction costs are deterministic/predictable. By staking TIME on the business node (as described above) Reddit can reduce transaction costs to as low as $0.0000025 per transaction.
Dragonchain Fees Table

Getting Started

How to run it
Building on Dragonchain is simple and requires no blockchain experience. Spin up a business node (L1) in our managed environment (AWS), run it in your own cloud environment, or on-prem in your own datacenter. Clear documentation will walk you through the steps of spinning up your first Dragonchain Level 1 Business node.
Getting started is easy...
  1. Download Dragonchain’s dctl
  2. Input three commands into a terminal
  3. Build an image
  4. Run it
More information can be found in our Get started documents.

Architecture
Dragonchain is an open source hybrid platform. Through Dragon Net, each chain combines the power of a public blockchain (like Ethereum) with the privacy of a private blockchain.
Dragonchain organizes its network into five separate levels. A Level 1, or business node, is a totally private blockchain only accessible through the use of public/private keypairs. All business logic, including smart contracts, can be executed on this node directly and added to the chain.
After creating a block, the Level 1 business node broadcasts a version stripped of sensitive private data to Dragon Net. Three Level 2 Validating nodes validate the transaction based on guidelines determined from the business. A Level 3 Diversity node checks that the level 2 nodes are from a diverse array of locations. A Level 4 Notary node, hosted by a KYC partner, then signs the validation record received from the Level 3 node. The transaction hash is ledgered to the Level 5 public chain to take advantage of the hash power of massive public networks.
Dragon Net can be thought of as a “blockchain of blockchains”, where every level is a complete private blockchain. Because an L1 can send to multiple nodes on a single level, proof of existence is distributed among many places in the network. Eventually, proof of existence reaches level 5 and is published on a public network.

API Documentation

APIs (on chain & off)

SDK Source

Nobody’s Perfect

Known issues or tradeoffs
  • Dragonchain is open source and even though the platform is easy enough for developers to code in any language they are comfortable with, we do not have so large a developer community as Ethereum. We would like to see the Ethereum developer community (and any other communities) become familiar with our SDK’s, our solutions, and our platform, to unlock the full potential of our Ethereum Interchain. Long ago we decided to prioritize both Bitcoin and Ethereum Interchains. We envision an ecosystem that encompasses different projects to give developers the ability to take full advantage of all the opportunities blockchain offers to create decentralized solutions not only for Reddit but for all of our current platforms and systems. We believe that together we will take the adoption of blockchain further. We currently have additional Interchain with Ethereum Classic. We look forward to Interchain with other blockchains in the future. We invite all blockchains projects who believe in decentralization and security to Interchain with Dragonchain.
  • While we only have 700 nodes compared to 8,000 Ethereum and 10,000 Bitcoin nodes. We harness those 18,000 nodes to scale to extremely high levels of security. See Dragonchain metrics.
  • Some may consider the centralization of Dragonchain’s business nodes as an issue at first glance, however, the model is by design to protect business data. We do not consider this a drawback as these nodes can make any, none, or all data public. Depending upon the implementation, every subreddit could have control of its own business node, for potential business and enterprise offerings, bringing new alternative revenue streams to Reddit.

Costs and resources

Summary of cost & resource information for both on-chain & off-chain components used in the PoC, as well as cost & resource estimates for further scaling. If your PoC is not on mainnet, make note of any mainnet caveats (such as congestion issues).
Every transaction on the PoC system had a transaction fee of $0.0001 (one-hundredth of a cent USD). At 256MM transactions, the demo cost $25,600. With current operational fees, the same demonstration would cost $640 USD.
For the demonstration, to achieve throughput to mimic a worldwide payments network, we modeled several clients in AWS and 4-5 business nodes to handle the traffic. The business nodes were tuned to handle higher throughput by adjusting memory and machine footprint on AWS. This flexibility is valuable to implementing a system such as envisioned by Reddit. Given that Reddit’s daily traffic (posts, replies, and votes) is less than half that of our demo, we would expect that the entire Reddit system could be handled on 2-5 business nodes using right-sized containers on AWS or similar environments.
Verification was accomplished on the operational Dragon Net network with over 700 independently owned verification nodes running around the world at no cost to the business other than paid transaction fees.

Requirements

Scaling

This PoC should scale to the numbers below with minimal costs (both on & off-chain). There should also be a clear path to supporting hundreds of millions of users.
Over a 5 day period, your scaling PoC should be able to handle:
*100,000 point claims (minting & distributing points) *25,000 subscriptions *75,000 one-off points burning *100,000 transfers
During Dragonchain’s 24 hour demo, the above required numbers were reached within the first few minutes.
Reddit’s total activity is 9000% more than Ethereum’s total transaction level. Even if you do not include votes, it is still 700% more than Ethereum’s current volume. Dragonchain has demonstrated that it can handle 250 million transactions a day, and it’s architecture allows for multiple systems to work at that level simultaneously. In our PoC, we demonstrate double the full capacity of Reddit, and every transaction was proven all the way to Bitcoin and Ethereum.
Reddit Scaling on Ethereum

Decentralization

Solutions should not depend on any single third-party provider. We prefer solutions that do not depend on specific entities such as Reddit or another provider, and solutions with no single point of control or failure in off-chain components but recognize there are numerous trade-offs to consider
Dragonchain’s architecture calls for a hybrid approach. Private business nodes hold the sensitive data while the validation and verification of transactions for the business are decentralized within seconds and secured to public blockchains within 10 minutes to 2 hours. Nodes could potentially be controlled by owners of individual subreddits for more organic decentralization.
  • Billing is currently centralized - there is a path to federation and decentralization of a scaled billing solution.
  • Operational multi-cloud
  • Operational on-premises capabilities
  • Operational deployment to any datacenter
  • Over 700 independent Community Verification Nodes with proof of ownership
  • Operational Interchain (Interoperable to Bitcoin, Ethereum, and Ethereum Classic, open to more)

Usability Scaling solutions should have a simple end user experience.

Users shouldn't have to maintain any extra state/proofs, regularly monitor activity, keep track of extra keys, or sign anything other than their normal transactions
Dragonchain and its customers have demonstrated extraordinary usability as a feature in many applications, where users do not need to know that the system is backed by a live blockchain. Lyceum is one of these examples, where the progress of academy courses is being tracked, and successful completion of courses is rewarded with certificates on chain. Our @Save_The_Tweet bot is popular on Twitter. When used with one of the following hashtags - #please, #blockchain, #ThankYou, or #eternalize the tweet is saved through Eternal to multiple blockchains. A proof report is available for future reference. Other examples in use are DEN, our decentralized social media platform, and our console, where users can track their node rewards, view their TIME, and operate a business node.
Examples:

Transactions complete in a reasonable amount of time (seconds or minutes, not hours or days)
All transactions are immediately usable on chain by the system. A transaction begins the path to decentralization at the conclusion of a 5-second block when it gets distributed across 5 separate community run nodes. Full decentralization occurs within 10 minutes to 2 hours depending on which interchain (Bitcoin, Ethereum, or Ethereum Classic) the transaction hits first. Within approximately 2 hours, the combined hash power of all interchained blockchains secures the transaction.

Free to use for end users (no gas fees, or fixed/minimal fees that Reddit can pay on their behalf)
With transaction pricing as low as $0.0000025 per transaction, it may be considered reasonable for Reddit to cover transaction fees for users.
All of Reddit's Transactions on Blockchain (month)
Community points can be earned by users and distributed directly to their Reddit account in batch (as per Reddit minting plan), and allow users to withdraw rewards to their Ethereum wallet whenever they wish. Withdrawal fees can be paid by either user or Reddit. This model has been operating inside the Dragonchain system since 2018, and many security and financial compliance features can be optionally added. We feel that this capability greatly enhances user experience because it is seamless to a regular user without cryptocurrency experience, yet flexible to a tech savvy user. With regard to currency or token transactions, these would occur on the Reddit network, verified to BTC and ETH. These transactions would incur the $0.0000025 transaction fee. To estimate this fee we use the monthly active Reddit users statista with a 60% adoption rate and an estimated 10 transactions per month average resulting in an approximate $720 cost across the system. Reddit could feasibly incur all associated internal network charges (mining/minting, transfer, burn) as these are very low and controllable fees.
Reddit Internal Token Transaction Fees

Reddit Ethereum Token Transaction Fees
When we consider further the Ethereum fees that might be incurred, we have a few choices for a solution.
  1. Offload all Ethereum transaction fees (user withdrawals) to interested users as they wish to withdraw tokens for external use or sale.
  2. Cover Ethereum transaction fees by aggregating them on a timed schedule. Users would request withdrawal (from Reddit or individual subreddits), and they would be transacted on the Ethereum network every hour (or some other schedule).
  3. In a combination of the above, customers could cover aggregated fees.
  4. Integrate with alternate Ethereum roll up solutions or other proposals to aggregate minting and distribution transactions onto Ethereum.

Bonus Points

Users should be able to view their balances & transactions via a blockchain explorer-style interface
From interfaces for users who have no knowledge of blockchain technology to users who are well versed in blockchain terms such as those present in a typical block explorer, a system powered by Dragonchain has flexibility on how to provide balances and transaction data to users. Transactions can be made viewable in an Eternal Proof Report, which displays raw data along with TIME staking information and traceability all the way to Bitcoin, Ethereum, and every other Interchained network. The report shows fields such as transaction ID, timestamp, block ID, multiple verifications, and Interchain proof. See example here.
Node payouts within the Dragonchain console are listed in chronological order and can be further seen in either Dragons or USD. See example here.
In our social media platform, Dragon Den, users can see, in real-time, their NRG and MTR balances. See example here.
A new influencer app powered by Dragonchain, Raiinmaker, breaks down data into a user friendly interface that shows coin portfolio, redeemed rewards, and social scores per campaign. See example here.

Exiting is fast & simple
Withdrawing funds on Dragonchain’s console requires three clicks, however, withdrawal scenarios with more enhanced security features per Reddit’s discretion are obtainable.

Interoperability Compatibility with third party apps (wallets/contracts/etc) is necessary.
Proven interoperability at scale that surpasses the required specifications. Our entire platform consists of interoperable blockchains connected to each other and traditional systems. APIs are well documented. Third party permissions are possible with a simple smart contract without the end user being aware. No need to learn any specialized proprietary language. Any code base (not subsets) is usable within a Docker container. Interoperable with any blockchain or traditional APIs. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js. Please see our source code and API documentation.

Scaling solutions should be extensible and allow third parties to build on top of it Open source and extensible
APIs should be well documented and stable

Documentation should be clear and complete
For full documentation, explore our docs, SDK’s, Github repo’s, architecture documents, original Disney documentation, and other links or resources provided in this proposal.

Third-party permissionless integrations should be possible & straightforward Smart contracts are Docker based, can be written in any language, use full language (not subsets), and can therefore be integrated with any system including traditional system APIs. Simple is better. Learning an uncommon or proprietary language should not be necessary.
Advanced knowledge of mathematics, cryptography, or L2 scaling should not be required. Compatibility with common utilities & toolchains is expected.
Dragonchain business nodes and smart contracts leverage Docker to allow the use of literally any language or executable code. No proprietary language is necessary. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js.

Bonus

Bonus Points: Show us how it works. Do you have an idea for a cool new use case for Community Points? Build it!

TIME

Community points could be awarded to Reddit users based upon TIME too, whereas the longer someone is part of a subreddit, the more community points someone naturally gained, even if not actively commenting or sharing new posts. A daily login could be required for these community points to be credited. This grants awards to readers too and incentivizes readers to create an account on Reddit if they browse the website often. This concept could also be leveraged to provide some level of reputation based upon duration and consistency of contribution to a community subreddit.

Dragon Den

Dragonchain has already built a social media platform that harnesses community involvement. Dragon Den is a decentralized community built on the Dragonchain blockchain platform. Dragon Den is Dragonchain’s answer to fake news, trolling, and censorship. It incentivizes the creation and evaluation of quality content within communities. It could be described as being a shareholder of a subreddit or Reddit in its entirety. The more your subreddit is thriving, the more rewarding it will be. Den is currently in a public beta and in active development, though the real token economy is not live yet. There are different tokens for various purposes. Two tokens are Lair Ownership Rights (LOR) and Lair Ownership Tokens (LOT). LOT is a non-fungible token for ownership of a specific Lair. LOT will only be created and converted from LOR.
Energy (NRG) and Matter (MTR) work jointly. Your MTR determines how much NRG you receive in a 24-hour period. Providing quality content, or evaluating content will earn MTR.

Security. Users have full ownership & control of their points.
All community points awarded based upon any type of activity or gift, are secured and provable to all Interchain networks (currently BTC, ETH, ETC). Users are free to spend and withdraw their points as they please, depending on the features Reddit wants to bring into production.

Balances and transactions cannot be forged, manipulated, or blocked by Reddit or anyone else
Users can withdraw their balance to their ERC20 wallet, directly through Reddit. Reddit can cover the fees on their behalf, or the user covers this with a portion of their balance.

Users should own their points and be able to get on-chain ERC20 tokens without permission from anyone else
Through our console users can withdraw their ERC20 rewards. This can be achieved on Reddit too. Here is a walkthrough of our console, though this does not show the quick withdrawal functionality, a user can withdraw at any time. https://www.youtube.com/watch?v=aNlTMxnfVHw

Points should be recoverable to on-chain ERC20 tokens even if all third-parties involved go offline
If necessary, signed transactions from the Reddit system (e.g. Reddit + Subreddit) can be sent to the Ethereum smart contract for minting.

A public, third-party review attesting to the soundness of the design should be available
To our knowledge, at least two large corporations, including a top 3 accounting firm, have conducted positive reviews. These reviews have never been made public, as Dragonchain did not pay or contract for these studies to be released.

Bonus points
Public, third-party implementation review available or in progress
See above

Compatibility with HSMs & hardware wallets
For the purpose of this proposal, all tokenization would be on the Ethereum network using standard token contracts and as such, would be able to leverage all hardware wallet and Ethereum ecosystem services.

Other Considerations

Minting/distributing tokens is not performed by Reddit directly
This operation can be automated by smart contract on Ethereum. Subreddits can if desired have a role to play.

One off point burning, as well as recurring, non-interactive point burning (for subreddit memberships) should be possible and scalable
This is possible and scalable with interaction between Dragonchain Reddit system and Ethereum token contract(s).

Fully open-source solutions are strongly preferred
Dragonchain is fully open source (see section on Disney release after conclusion).

Conclusion

Whether it is today, or in the future, we would like to work together to bring secure flexibility to the highest standards. It is our hope to be considered by Ethereum, Reddit, and other integrative solutions so we may further discuss the possibilities of implementation. In our public demonstration, 256 million transactions were handled in our operational network on chain in 24 hours, for the low cost of $25K, which if run today would cost $625. Dragonchain’s interoperable foundation provides the atmosphere necessary to implement a frictionless community points system. Thank you for your consideration of our proposal. We look forward to working with the community to make something great!

Disney Releases Blockchain Platform as Open Source

The team at Disney created the Disney Private Blockchain Platform. The system was a hybrid interoperable blockchain platform for ledgering and smart contract development geared toward solving problems with blockchain adoption and usability. All objective evaluation would consider the team’s output a success. We released a list of use cases that we explored in some capacity at Disney, and our input on blockchain standardization as part of our participation in the W3C Blockchain Community Group.
https://lists.w3.org/Archives/Public/public-blockchain/2016May/0052.html

Open Source

In 2016, Roets proposed to release the platform as open source to spread the technology outside of Disney, as others within the W3C group were interested in the solutions that had been created inside of Disney.
Following a long process, step by step, the team met requirements for release. Among the requirements, the team had to:
  • Obtain VP support and approval for the release
  • Verify ownership of the software to be released
  • Verify that no proprietary content would be released
  • Convince the organization that there was a value to the open source community
  • Convince the organization that there was a value to Disney
  • Offer the plan for ongoing maintenance of the project outside of Disney
  • Itemize competing projects
  • Verify no conflict of interest
  • Preferred license
  • Change the project name to not use the name Disney, any Disney character, or any other associated IP - proposed Dragonchain - approved
  • Obtain legal approval
  • Approval from corporate, parks, and other business units
  • Approval from multiple Disney patent groups Copyright holder defined by Disney (Disney Connected and Advanced Technologies)
  • Trademark searches conducted for the selected name Dragonchain
  • Obtain IT security approval
  • Manual review of OSS components conducted
  • OWASP Dependency and Vulnerability Check Conducted
  • Obtain technical (software) approval
  • Offer management, process, and financial plans for the maintenance of the project.
  • Meet list of items to be addressed before release
  • Remove all Disney project references and scripts
  • Create a public distribution list for email communications
  • Remove Roets’ direct and internal contact information
  • Create public Slack channel and move from Disney slack channels
  • Create proper labels for issue tracking
  • Rename internal private Github repository
  • Add informative description to Github page
  • Expand README.md with more specific information
  • Add information beyond current “Blockchains are Magic”
  • Add getting started sections and info on cloning/forking the project
  • Add installation details
  • Add uninstall process
  • Add unit, functional, and integration test information
  • Detail how to contribute and get involved
  • Describe the git workflow that the project will use
  • Move to public, non-Disney git repository (Github or Bitbucket)
  • Obtain Disney Open Source Committee approval for release
On top of meeting the above criteria, as part of the process, the maintainer of the project had to receive the codebase on their own personal email and create accounts for maintenance (e.g. Github) with non-Disney accounts. Given the fact that the project spanned multiple business units, Roets was individually responsible for its ongoing maintenance. Because of this, he proposed in the open source application to create a non-profit organization to hold the IP and maintain the project. This was approved by Disney.
The Disney Open Source Committee approved the application known as OSSRELEASE-10, and the code was released on October 2, 2016. Disney decided to not issue a press release.
Original OSSRELASE-10 document

Dragonchain Foundation

The Dragonchain Foundation was created on January 17, 2017. https://den.social/l/Dragonchain/24130078352e485d96d2125082151cf0/dragonchain-and-disney/
submitted by j0j0r0 to ethereum [link] [comments]

Hulk.Finance: A Combination of DeFi and High Frequency Trading

Hulk.Finance: A Combination of DeFi and High Frequency Trading
DeFi continues to push the limits of blockchain technology. Whether its staking a native token for a second token from the same ecosystem, locking liquidity for an eternity to promote liquidity providing and the benefits of locking tokens, or simply creating new tokenomics that can be tested and studied, DeFi is exploring all avenues to produce the next breakout token such as YFI. Hulk.finance has stepped in to do just that.

https://preview.redd.it/f4mrjlxu5ct51.png?width=675&format=png&auto=webp&s=2c2d11429ae554d541bed3a19955fed71e6f9b6d
Hulk.finance (Contract Address: 0xE1f8CD01aB04b51d02C6fb2BCA61B03fB5e33B99) is an ERC20 token which plans to utilize a DAO (Decentralized Autonomous Organization) format that will be community governed in order to promote high frequency trading in a manner only DeFi can bring to the table. As stated on their website, “Our project connects a high-yield partner HFT (High Frequency Trading) fund that has successfully worked from the beginning of 2020 and has year-to-date yields of more than 40%. The fund size is more than 70 millions USD and they operate on several cryptocurrency exchanges like Binance and Bithumb with their API robots. What is good — automated trading does not require continuous uptrend of the Bitcoin price. We have seen good results during Bitcoin breakouts and breakdowns. We want to have the same yields from our investments. But there is a problem — they work with an entrance barrier of 1,000,000 USDT, like many private banking services or high-yield ETFs. Our basic idea is to make a kind of DeFi staking pool and put it under the management of the HFT fund. We will develop all infrastructure for connecting finance flows, deposits, and withdrawals.

https://preview.redd.it/fugnjuoz5ct51.png?width=717&format=png&auto=webp&s=2aa5bd3828b4803191de330f024edab277f47906

The HULK total supply is 100,000 Tokens. Distribution breakdown is as follows:
  • Farms Distribution: 80,000 (6% or 4,800 — Team Part)
  • Pre-sale: 10,000
  • Initial Liquidity Pool: 8,000
  • Development: 1,000
  • Marketing: 1,000

https://preview.redd.it/js0zqx136ct51.png?width=717&format=png&auto=webp&s=0469468caa8d47be95baf392b2a26a9303d7f773
The project is new but already has a road-map to help guide their lofty ambitions. The first step begins with the formation of the pre-sale and Liquidity pool on Uniswap which is currently ongoing. Secondly, they will distribute Hulk tokens via staking farms. As described in their website they “will run staking farms for farming 80,000 HULKs. You will need to stake appropriate tokens on the selected farms to get your share of rewards in HULKs. Farm 1 will farm rewards of 60,000 HULKs within 15 days, staking token — ETH-HULK LP Uniswap V2. Farm 2 will farm rewards of 10,000 HULKs within 15 days, staking token — USDN. Farm 3 will farm rewards of 10,000 HULKs within 15 days, staking token — Token Y. Token Y will be announced prior to the farms’ launch. Genesis farming time will be 15 days, after that farming rate will be settled on the level of 15th day. We implement halving every three days, so early farmers will get more HULKs. View on Etherscan. In order to support the price of the token from dumping, we will take a 5% commission for the sale of tokens, when holders sell it on Uniswap, burn 4% and add 1% to the community grants account. The burnt amount will be added to farming pools after 15 days of initial farming. So, for example, if someone sold 20,000 HULKs, we will take 1,000 tokens, burn 800 of them and they will be re-minted on day 16. 200 tokens will be sent to the community grants address. The total supply is 100,000 tokens.

The third step includes the staking pool. The staking pool will be open for everyone on the following terms and conditions.

  • Staking Pool 1 Target: 10 million USDT.
  • Guaranteed APY: 15%.
  • Minimum Staking Amount: 100 USDT.
  • Type Of Staking: Locked
  • Minimum Staking Term: 24 hours
  • Withdraw Period: 24 hours after withdrawal order.
  • Reward Calculation: daily.
Funds from the staking pool will be transferred to the HFT fund for trading operations.

Lastly, the Vault concept is descriptive. “We want to share revenue from HFT fund among HULK holders that stake their tokens in HULK Vault. HFT fund will send revenue from its operation once a month, on the first day of the following month. Current concept: Monthly revenue from HFT operations will be shared between HULK tokens staked in the vault according to the time of staking divided on 720 hours. Example: You stake your 500 HULK tokens in Vault for 20 days (480 hours). Your HULK/hours equal to 500\480=240,000. Total* HULK/hours in Vault in this month — 60,000,000. Your share in this month = 0,4%. HFT fund has earned 4% on staking pool funds this month. After payout of their 1,25% (15%/12) per month to USDT stakers, the remaining part is 10,000,000 USDT x 2,75% = 275,000 USD. Your profit share 0.4% of 275,000 = 1100 USDT will be sent as USDT to your address, connected with a Vault.”

All of the above described by the tokens creators seems very complicated, but many tokens are already trying to accomplish this without access to an already built fund which can execute trades on a daily basis. Also due in part is the projects commitment to becoming a DAO by allowing holders to vote on key project decisions and development to make the ecosystem more effective and manageable. Decentralization is the most trustworthy base of contract/cryptocurrency ownership. It creates a unique and secure environment free from direct outside influence due to the filter of the entire community being involved. The developers have said that the voting system for the project will be done within the first 30 days of project launch.

With lofty ambition and high expectations, the project looks to capitalize on the DeFi boom by hedging their fund against the market and giving holders a share of the pie. It will be interesting to see how successful and sustainable the project can be, but we will find out soon enough.

Pertinent Hulk.Finance Links:



(I write articles and reviews for legitimate, interesting, up and coming cryptocurrency projects. Feel free to PM me to review your project. Thank you!)
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Disclaimer: This is not financial advice. The sole purpose of this post/article is to provide and create an informative and educated discussion regarding the project in question. Invest at your own risk.
submitted by Chrisc9234 to CryptoCurrencies [link] [comments]

Hulk.Finance: A Combination of DeFi and High Frequency Trading

Hulk.Finance: A Combination of DeFi and High Frequency Trading
DeFi continues to push the limits of blockchain technology. Whether its staking a native token for a second token from the same ecosystem, locking liquidity for an eternity to promote liquidity providing and the benefits of locking tokens, or simply creating new tokenomics that can be tested and studied, DeFi is exploring all avenues to produce the next breakout token such as YFI. Hulk.finance has stepped in to do just that.

https://preview.redd.it/j5qhdouxect51.png?width=675&format=png&auto=webp&s=f054e18e44a59d2328850373cbce91c648875670

Hulk.finance (Contract Address: 0xE1f8CD01aB04b51d02C6fb2BCA61B03fB5e33B99) is an ERC20 token which plans to utilize a DAO (Decentralized Autonomous Organization) format that will be community governed in order to promote high frequency trading in a manner only DeFi can bring to the table. As stated on their website, “Our project connects a high-yield partner HFT (High Frequency Trading) fund that has successfully worked from the beginning of 2020 and has year-to-date yields of more than 40%. The fund size is more than 70 millions USD and they operate on several cryptocurrency exchanges like Binance and Bithumb with their API robots. What is good — automated trading does not require continuous uptrend of the Bitcoin price. We have seen good results during Bitcoin breakouts and breakdowns. We want to have the same yields from our investments. But there is a problem — they work with an entrance barrier of 1,000,000 USDT, like many private banking services or high-yield ETFs. Our basic idea is to make a kind of DeFi staking pool and put it under the management of the HFT fund. We will develop all infrastructure for connecting finance flows, deposits, and withdrawals.

https://preview.redd.it/0e3j6i0zect51.png?width=717&format=png&auto=webp&s=0578f1dfd88142f6da788b39a2e90833fb627c51

The HULK total supply is 100,000 Tokens. Distribution breakdown is as follows:

  • Farms Distribution: 80,000 (6% or 4,800 — Team Part)
  • Pre-sale: 10,000
  • Initial Liquidity Pool: 8,000
  • Development: 1,000
  • Marketing: 1,000

https://preview.redd.it/xiz7f0i2fct51.png?width=717&format=png&auto=webp&s=85a8e7ccc13661cb6318ed845793ab4f70c729e3
The project is new but already has a road-map to help guide their lofty ambitions. The first step begins with the formation of the pre-sale and Liquidity pool on Uniswap which is currently ongoing. Secondly, they will distribute Hulk tokens via staking farms. As described in their website they “will run staking farms for farming 80,000 HULKs*. You will need to stake appropriate tokens on the selected farms to get your share of rewards in HULKs. Farm 1 will farm rewards of 60,000* HULKs within 15 days, staking token — ETH-HULK LP Uniswap V2. Farm 2 will farm rewards of 10,000 HULKs within 15 days, staking token — USDN. Farm 3 will farm rewards of 10,000 HULKs within 15 days, staking token — Token Y. Token Y will be announced prior to the farms’ launch. Genesis farming time will be 15 days, after that farming rate will be settled on the level of 15th day. We implement halving every three days, so early farmers will get more HULKs. View on Etherscan. In order to support the price of the token from dumping, we will take a 5% commission for the sale of tokens, when holders sell it on Uniswap, burn 4% and add 1% to the community grants account. The burnt amount will be added to farming pools after 15 days of initial farming. So, for example, if someone sold 20,000 HULKs, we will take 1,000 tokens, burn 800 of them and they will be re-minted on day 16. 200 tokens will be sent to the community grants address. The total supply is 100,000 tokens.”

The third step includes the staking pool. The staking pool will be open for everyone on the following terms and conditions.

  • Staking Pool 1 Target: 10 million USDT.
  • Guaranteed APY: 15%.
  • Minimum Staking Amount: 100 USDT.
  • Type Of Staking: Locked
  • Minimum Staking Term: 24 hours
  • Withdraw Period: 24 hours after withdrawal order.
  • Reward Calculation: daily.

Funds from the staking pool will be transferred to the HFT fund for trading operations.

Lastly, the Vault concept is descriptive. “We want to share revenue from HFT fund among HULK holders that stake their tokens in HULK Vault. HFT fund will send revenue from its operation once a month, on the first day of the following month. Current concept: Monthly revenue from HFT operations will be shared between HULK tokens staked in the vault according to the time of staking divided on 720 hours. Example: You stake your 500 HULK tokens in Vault for 20 days (480 hours). Your HULK/hours equal to 500*480=240,000. Total HULK/hours in Vault in this month — 60,000,000. Your share in this month = 0,4%. HFT fund has earned 4% on staking pool funds this month. After payout of their 1,25% (15%/12) per month to USDT stakers, the remaining part is 10,000,000 USDT x 2,75% = 275,000 USD. Your profit share 0.4% of 275,000 = 1100 USDT will be sent as USDT to your address, connected with a Vault.”

All of the above described by the tokens creators seems very complicated, but many tokens are already trying to accomplish this without access to an already built fund which can execute trades on a daily basis. Also due in part is the projects commitment to becoming a DAO by allowing holders to vote on key project decisions and development to make the ecosystem more effective and manageable. Decentralization is the most trustworthy base of contract/cryptocurrency ownership. It creates a unique and secure environment free from direct outside influence due to the filter of the entire community being involved. The developers have said that the voting system for the project will be done within the first 30 days of project launch.

With lofty ambition and high expectations, the project looks to capitalize on the DeFi boom by hedging their fund against the market and giving holders a share of the pie. It will be interesting to see how successful and sustainable the project can be, but we will find out soon enough.

Pertinent Hulk.Finance Links:



(I write articles and reviews for legitimate, interesting, up and coming cryptocurrency projects. Feel free to PM me to review your project. Thank you!)
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Disclaimer: This is not financial advice. The sole purpose of this post/article is to provide and create an informative and educated discussion regarding the project in question. Invest at your own risk.
submitted by Chrisc9234 to ethtrader [link] [comments]

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake
https://preview.redd.it/b80c05tnb9e51.jpg?width=2550&format=pjpg&auto=webp&s=850282c1a3962466ed44f73886dae1c8872d0f31
Submitted for consideration to The Great Reddit Scaling Bake-Off
Baked by the pastry chefs at Offchain Labs
Please send questions or comments to [[email protected] ](mailto:[email protected])
1. Overview
We're excited to submit Arbitrum Rollup for consideration to The Great Reddit Scaling Bake-Off. Arbitrum Rollup is the only Ethereum scaling solution that supports arbitrary smart contracts without compromising on Ethereum's security or adding points of centralization. For Reddit, this means that Arbitrum can not only scale the minting and transfer of Community Points, but it can foster a creative ecosystem built around Reddit Community Points enabling points to be used in a wide variety of third party applications. That's right -- you can have your cake and eat it too!
Arbitrum Rollup isn't just Ethereum-style. Its Layer 2 transactions are byte-for-byte identical to Ethereum, which means Ethereum users can continue to use their existing addresses and wallets, and Ethereum developers can continue to use their favorite toolchains and development environments out-of-the-box with Arbitrum. Coupling Arbitrum’s tooling-compatibility with its trustless asset interoperability, Reddit not only can scale but can onboard the entire Ethereum community at no cost by giving them the same experience they already know and love (well, certainly know).
To benchmark how Arbitrum can scale Reddit Community Points, we launched the Reddit contracts on an Arbitrum Rollup chain. Since Arbitrum provides full Solidity support, we didn't have to rewrite the Reddit contracts or try to mimic their functionality using an unfamiliar paradigm. Nope, none of that. We launched the Reddit contracts unmodified on Arbitrum Rollup complete with support for minting and distributing points. Like every Arbitrum Rollup chain, the chain included a bridge interface in which users can transfer Community Points or any other asset between the L1 and L2 chains. Arbitrum Rollup chains also support dynamic contract loading, which would allow third-party developers to launch custom ecosystem apps that integrate with Community Points on the very same chain that runs the Reddit contracts.
1.1 Why Ethereum
Perhaps the most exciting benefit of distributing Community Points using a blockchain is the ability to seamlessly port points to other applications and use them in a wide variety of contexts. Applications may include simple transfers such as a restaurant that allows Redditors to spend points on drinks. Or it may include complex smart contracts -- such as placing Community Points as a wager for a multiparty game or as collateral in a financial contract.
The common denominator between all of the fun uses of Reddit points is that it needs a thriving ecosystem of both users and developers, and the Ethereum blockchain is perhaps the only smart contract platform with significant adoption today. While many Layer 1 blockchains boast lower cost or higher throughput than the Ethereum blockchain, more often than not, these attributes mask the reality of little usage, weaker security, or both.
Perhaps another platform with significant usage will rise in the future. But today, Ethereum captures the mindshare of the blockchain community, and for Community Points to provide the most utility, the Ethereum blockchain is the natural choice.
1.2 Why Arbitrum
While Ethereum's ecosystem is unmatched, the reality is that fees are high and capacity is too low to support the scale of Reddit Community Points. Enter Arbitrum. Arbitrum Rollup provides all of the ecosystem benefits of Ethereum, but with orders of magnitude more capacity and at a fraction of the cost of native Ethereum smart contracts. And most of all, we don't change the experience from users. They continue to use the same wallets, addresses, languages, and tools.
Arbitrum Rollup is not the only solution that can scale payments, but it is the only developed solution that can scale both payments and arbitrary smart contracts trustlessly, which means that third party users can build highly scalable add-on apps that can be used without withdrawing money from the Rollup chain. If you believe that Reddit users will want to use their Community Points in smart contracts--and we believe they will--then it makes the most sense to choose a single scaling solution that can support the entire ecosystem, eliminating friction for users.
We view being able to run smart contracts in the same scaling solution as fundamentally critical since if there's significant demand in running smart contracts from Reddit's ecosystem, this would be a load on Ethereum and would itself require a scaling solution. Moreover, having different scaling solutions for the minting/distribution/spending of points and for third party apps would be burdensome for users as they'd have to constantly shuffle their Points back and forth.
2. Arbitrum at a glance
Arbitrum Rollup has a unique value proposition as it offers a combination of features that no other scaling solution achieves. Here we highlight its core attributes.
Decentralized. Arbitrum Rollup is as decentralized as Ethereum. Unlike some other Layer 2 scaling projects, Arbitrum Rollup doesn't have any centralized components or centralized operators who can censor users or delay transactions. Even in non-custodial systems, centralized components provide a risk as the operators are generally incentivized to increase their profit by extracting rent from users often in ways that severely degrade user experience. Even if centralized operators are altruistic, centralized components are subject to hacking, coercion, and potential liability.
Massive Scaling. Arbitrum achieves order of magnitude scaling over Ethereum's L1 smart contracts. Our software currently supports 453 transactions-per-second for basic transactions (at 1616 Ethereum gas per tx). We have a lot of room left to optimize (e.g. aggregating signatures), and over the next several months capacity will increase significantly. As described in detail below, Arbitrum can easily support and surpass Reddit's anticipated initial load, and its capacity will continue to improve as Reddit's capacity needs grow.
Low cost. The cost of running Arbitrum Rollup is quite low compared to L1 Ethereum and other scaling solutions such as those based on zero-knowledge proofs. Layer 2 fees are low, fixed, and predictable and should not be overly burdensome for Reddit to cover. Nobody needs to use special equipment or high-end machines. Arbitrum requires validators, which is a permissionless role that can be run on any reasonable on-line machine. Although anybody can act as a validator, in order to protect against a “tragedy of the commons” and make sure reputable validators are participating, we support a notion of “invited validators” that are compensated for their costs. In general, users pay (low) fees to cover the invited validators’ costs, but we imagine that Reddit may cover this cost for its users. See more on the costs and validator options below.
Ethereum Developer Experience. Not only does Arbitrum support EVM smart contracts, but the developer experience is identical to that of L1 Ethereum contracts and fully compatible with Ethereum tooling. Developers can port existing Solidity apps or write new ones using their favorite and familiar toolchains (e.g. Truffle, Buidler). There are no new languages or coding paradigms to learn.
Ethereum wallet compatibility. Just as in Ethereum, Arbitrum users need only hold keys, but do not have to store any coin history or additional data to protect or access their funds. Since Arbitrum transactions are semantically identical to Ethereum L1 transactions, existing Ethereum users can use their existing Ethereum keys with their existing wallet software such as Metamask.
Token interoperability. Users can easily transfer their ETH, ERC-20 and ERC-721 tokens between Ethereum and the Arbitrum Rollup chain. As we explain in detail below, it is possible to mint tokens in L2 that can subsequently be withdrawn and recognized by the L1 token contract.
Fast finality. Transactions complete with the same finality time as Ethereum L1 (and it's possible to get faster finality guarantees by trading away trust assumptions; see the Arbitrum Rollup whitepaper for details).
Non-custodial. Arbitrum Rollup is a non-custodial scaling solution, so users control their funds/points and neither Reddit nor anyone else can ever access or revoke points held by users.
Censorship Resistant. Since it's completely decentralized, and the Arbitrum protocol guarantees progress trustlessly, Arbitrum Rollup is just as censorship-proof as Ethereum.
Block explorer. The Arbitrum Rollup block explorer allows users to view and analyze transactions on the Rollup chain.
Limitations
Although this is a bake-off, we're not going to sugar coat anything. Arbitrum Rollup, like any Optimistic Rollup protocol, does have one limitation, and that's the delay on withdrawals.
As for the concrete length of the delay, we've done a good deal of internal modeling and have blogged about this as well. Our current modeling suggests a 3-hour delay is sufficient (but as discussed in the linked post there is a tradeoff space between the length of the challenge period and the size of the validators’ deposit).
Note that this doesn't mean that the chain is delayed for three hours. Arbitrum Rollup supports pipelining of execution, which means that validators can keep building new states even while previous ones are “in the pipeline” for confirmation. As the challenge delays expire for each update, a new state will be confirmed (read more about this here).
So activity and progress on the chain are not delayed by the challenge period. The only thing that's delayed is the consummation of withdrawals. Recall though that any single honest validator knows immediately (at the speed of L1 finality) which state updates are correct and can guarantee that they will eventually be confirmed, so once a valid withdrawal has been requested on-chain, every honest party knows that the withdrawal will definitely happen. There's a natural place here for a liquidity market in which a validator (or someone who trusts a validator) can provide withdrawal loans for a small interest fee. This is a no-risk business for them as they know which withdrawals will be confirmed (and can force their confirmation trustlessly no matter what anyone else does) but are just waiting for on-chain finality.
3. The recipe: How Arbitrum Rollup works
For a description of the technical components of Arbitrum Rollup and how they interact to create a highly scalable protocol with a developer experience that is identical to Ethereum, please refer to the following documents:
Arbitrum Rollup Whitepaper
Arbitrum academic paper (describes a previous version of Arbitrum)
4. Developer docs and APIs
For full details about how to set up and interact with an Arbitrum Rollup chain or validator, please refer to our developer docs, which can be found at https://developer.offchainlabs.com/.
Note that the Arbitrum version described on that site is older and will soon be replaced by the version we are entering in Reddit Bake-Off, which is still undergoing internal testing before public release.
5. Who are the validators?
As with any Layer 2 protocol, advancing the protocol correctly requires at least one validator (sometimes called block producers) that is honest and available. A natural question is: who are the validators?
Recall that the validator set for an Arbitrum chain is open and permissionless; anyone can start or stop validating at will. (A useful analogy is to full nodes on an L1 chain.) But we understand that even though anyone can participate, Reddit may want to guarantee that highly reputable nodes are validating their chain. Reddit may choose to validate the chain themselves and/or hire third-party validators.To this end, we have begun building a marketplace for validator-for-hire services so that dapp developers can outsource validation services to reputable nodes with high up-time. We've announced a partnership in which Chainlink nodes will provide Arbitrum validation services, and we expect to announce more partnerships shortly with other blockchain infrastructure providers.
Although there is no requirement that validators are paid, Arbitrum’s economic model tracks validators’ costs (e.g. amount of computation and storage) and can charge small fees on user transactions, using a gas-type system, to cover those costs. Alternatively, a single party such as Reddit can agree to cover the costs of invited validators.
6. Reddit Contract Support
Since Arbitrum contracts and transactions are byte-for-byte compatible with Ethereum, supporting the Reddit contracts is as simple as launching them on an Arbitrum chain.
Minting. Arbitrum Rollup supports hybrid L1/L2 tokens which can be minted in L2 and then withdrawn onto the L1. An L1 contract at address A can make a special call to the EthBridge which deploys a "buddy contract" to the same address A on an Arbitrum chain. Since it's deployed at the same address, users can know that the L2 contract is the authorized "buddy" of the L1 contract on the Arbitrum chain.
For minting, the L1 contract is a standard ERC-20 contract which mints and burns tokens when requested by the L2 contract. It is paired with an ERC-20 contract in L2 which mints tokens based on whatever programmer provided minting facility is desired and burns tokens when they are withdrawn from the rollup chain. Given this base infrastructure, Arbitrum can support any smart contract based method for minting tokens in L2, and indeed we directly support Reddit's signature/claim based minting in L2.
Batch minting. What's better than a mint cookie? A whole batch! In addition to supporting Reddit’s current minting/claiming scheme, we built a second minting design, which we believe outperforms the signature/claim system in many scenarios.
In the current system, Reddit periodically issues signed statements to users, who then take those statements to the blockchain to claim their tokens. An alternative approach would have Reddit directly submit the list of users/amounts to the blockchain and distribute the tokens to the users without the signature/claim process.
To optimize the cost efficiency of this approach, we designed an application-specific compression scheme to minimize the size of the batch distribution list. We analyzed the data from Reddit's previous distributions and found that the data is highly compressible since token amounts are small and repeated, and addresses appear multiple times. Our function groups transactions by size, and replaces previously-seen addresses with a shorter index value. We wrote client code to compress the data, wrote a Solidity decompressing function, and integrated that function into Reddit’s contract running on Arbitrum.
When we ran the compression function on the previous Reddit distribution data, we found that we could compress batched minting data down to to 11.8 bytes per minting event (averaged over a 6-month trace of Reddit’s historical token grants)compared with roughly 174 bytes of on-chain data needed for the signature claim approach to minting (roughly 43 for an RLP-encoded null transaction + 65 for Reddit's signature + 65 for the user's signature + roughly 8 for the number of Points) .
The relative benefit of the two approaches with respect to on-chain call data cost depends on the percentage of users that will actually claim their tokens on chain. With the above figures, batch minting will be cheaper if roughly 5% of users redeem their claims. We stress that our compression scheme is not Arbitrum-specific and would be beneficial in any general-purpose smart contract platform.
8. Benchmarks and costs
In this section, we give the full costs of operating the Reddit contracts on an Arbitrum Rollup chain including the L1 gas costs for the Rollup chain, the costs of computation and storage for the L2 validators as well as the capital lockup requirements for staking.
Arbitrum Rollup is still on testnet, so we did not run mainnet benchmarks. Instead, we measured the L1 gas cost and L2 workload for Reddit operations on Arbitrum and calculated the total cost assuming current Ethereum gas prices. As noted below in detail, our measurements do not assume that Arbitrum is consuming the entire capacity of Ethereum. We will present the details of our model now, but for full transparency you can also play around with it yourself and adjust the parameters, by copying the spreadsheet found here.
Our cost model is based on measurements of Reddit’s contracts, running unmodified (except for the addition of a batch minting function) on Arbitrum Rollup on top of Ethereum.
On the distribution of transactions and frequency of assertions. Reddit's instructions specify the following minimum parameters that submissions should support:
Over a 5 day period, your scaling PoC should be able to handle:
  • 100,000 point claims (minting & distributing points)
  • 25,000 subscriptions
  • 75,000 one-off points burning
  • 100,000 transfers
We provide the full costs of operating an Arbitrum Rollup chain with this usage under the assumption that tokens are minted or granted to users in batches, but other transactions are uniformly distributed over the 5 day period. Unlike some other submissions, we do not make unrealistic assumptions that all operations can be submitted in enormous batches. We assume that batch minting is done in batches that use only a few percent on an L1 block’s gas, and that other operations come in evenly over time and are submitted in batches, with one batch every five minutes to keep latency reasonable. (Users are probably already waiting for L1 finality, which takes at least that long to achieve.)
We note that assuming that there are only 300,000 transactions that arrive uniformly over the 5 day period will make our benchmark numbers lower, but we believe that this will reflect the true cost of running the system. To see why, say that batches are submitted every five minutes (20 L1 blocks) and there's a fixed overhead of c bytes of calldata per batch, the cost of which will get amortized over all transactions executed in that batch. Assume that each individual transaction adds a marginal cost of t. Lastly assume the capacity of the scaling system is high enough that it can support all of Reddit's 300,000 transactions within a single 20-block batch (i.e. that there is more than c + 300,000*t byes of calldata available in 20 blocks).
Consider what happens if c, the per-batch overhead, is large (which it is in some systems, but not in Arbitrum). In the scenario that transactions actually arrive at the system's capacity and each batch is full, then c gets amortized over 300,000 transactions. But if we assume that the system is not running at capacity--and only receives 300,000 transactions arriving uniformly over 5 days-- then each 20-block assertion will contain about 200 transactions, and thus each transaction will pay a nontrivial cost due to c.
We are aware that other proposals presented scaling numbers assuming that 300,000 transactions arrived at maximum capacity and was executed in a single mega-transaction, but according to our estimates, for at least one such report, this led to a reported gas price that was 2-3 orders of magnitude lower than it would have been assuming uniform arrival. We make more realistic batching assumptions, and we believe Arbitrum compares well when batch sizes are realistic.
Our model. Our cost model includes several sources of cost:
  • L1 gas costs: This is the cost of posting transactions as calldata on the L1 chain, as well as the overhead associated with each batch of transactions, and the L1 cost of settling transactions in the Arbitrum protocol.
  • Validator’s staking costs: In normal operation, one validator will need to be staked. The stake is assumed to be 0.2% of the total value of the chain (which is assumed to be $1 per user who is eligible to claim points). The cost of staking is the interest that could be earned on the money if it were not staked.
  • Validator computation and storage: Every validator must do computation to track the chain’s processing of transactions, and must maintain storage to keep track of the contracts’ EVM storage. The cost of computation and storage are estimated based on measurements, with the dollar cost of resources based on Amazon Web Services pricing.
It’s clear from our modeling that the predominant cost is for L1 calldata. This will probably be true for any plausible rollup-based system.
Our model also shows that Arbitrum can scale to workloads much larger than Reddit’s nominal workload, without exhausting L1 or L2 resources. The scaling bottleneck will ultimately be calldata on the L1 chain. We believe that cost could be reduced substantially if necessary by clever encoding of data. (In our design any compression / decompression of L2 transaction calldata would be done by client software and L2 programs, never by an L1 contract.)
9. Status of Arbitrum Rollup
Arbitrum Rollup is live on Ethereum testnet. All of the code written to date including everything included in the Reddit demo is open source and permissively licensed under the Apache V2 license. The first testnet version of Arbitrum Rollup was released on testnet in February. Our current internal version, which we used to benchmark the Reddit contracts, will be released soon and will be a major upgrade.
Both the Arbitrum design as well as the implementation are heavily audited by independent third parties. The Arbitrum academic paper was published at USENIX Security, a top-tier peer-reviewed academic venue. For the Arbitrum software, we have engaged Trail of Bits for a security audit, which is currently ongoing, and we are committed to have a clean report before launching on Ethereum mainnet.
10. Reddit Universe Arbitrum Rollup Chain
The benchmarks described in this document were all measured using the latest internal build of our software. When we release the new software upgrade publicly we will launch a Reddit Universe Arbitrum Rollup chain as a public demo, which will contain the Reddit contracts as well as a Uniswap instance and a Connext Hub, demonstrating how Community Points can be integrated into third party apps. We will also allow members of the public to dynamically launch ecosystem contracts. We at Offchain Labs will cover the validating costs for the Reddit Universe public demo.
If the folks at Reddit would like to evaluate our software prior to our public demo, please email us at [email protected] and we'd be more than happy to provide early access.
11. Even more scaling: Arbitrum Sidechains
Rollups are an excellent approach to scaling, and we are excited about Arbitrum Rollup which far surpasses Reddit's scaling needs. But looking forward to Reddit's eventual goal of supporting hundreds of millions of users, there will likely come a time when Reddit needs more scaling than any Rollup protocol can provide.
While Rollups greatly reduce costs, they don't break the linear barrier. That is, all transactions have an on-chain footprint (because all calldata must be posted on-chain), albeit a far smaller one than on native Ethereum, and the L1 limitations end up being the bottleneck for capacity and cost. Since Ethereum has limited capacity, this linear use of on-chain resources means that costs will eventually increase superlinearly with traffic.
The good news is that we at Offchain Labs have a solution in our roadmap that can satisfy this extreme-scaling setting as well: Arbitrum AnyTrust Sidechains. Arbitrum Sidechains are similar to Arbitrum Rollup, but deviate in that they name a permissioned set of validators. When a chain’s validators agree off-chain, they can greatly reduce the on-chain footprint of the protocol and require almost no data to be put on-chain. When validators can't reach unanimous agreement off-chain, the protocol reverts to Arbitrum Rollup. Technically, Arbitrum Sidechains can be viewed as a hybrid between state channels and Rollup, switching back and forth as necessary, and combining the performance and cost that state channels can achieve in the optimistic case, with the robustness of Rollup in other cases. The core technical challenge is how to switch seamlessly between modes and how to guarantee that security is maintained throughout.
Arbitrum Sidechains break through this linear barrier, while still maintaining a high level of security and decentralization. Arbitrum Sidechains provide the AnyTrust guarantee, which says that as long as any one validator is honest and available (even if you don't know which one will be), the L2 chain is guaranteed to execute correctly according to its code and guaranteed to make progress. Unlike in a state channel, offchain progress does not require unanimous consent, and liveness is preserved as long as there is a single honest validator.
Note that the trust model for Arbitrum Sidechains is much stronger than for typical BFT-style chains which introduce a consensus "voting" protocols among a small permissioned group of validators. BFT-based protocols require a supermajority (more than 2/3) of validators to agree. In Arbitrum Sidechains, by contrast, all you need is a single honest validator to achieve guaranteed correctness and progress. Notice that in Arbitrum adding validators strictly increases security since the AnyTrust guarantee provides correctness as long as any one validator is honest and available. By contrast, in BFT-style protocols, adding nodes can be dangerous as a coalition of dishonest nodes can break the protocol.
Like Arbitrum Rollup, the developer and user experiences for Arbitrum Sidechains will be identical to that of Ethereum. Reddit would be able to choose a large and diverse set of validators, and all that they would need to guarantee to break through the scaling barrier is that a single one of them will remain honest.
We hope to have Arbitrum Sidechains in production in early 2021, and thus when Reddit reaches the scale that surpasses the capacity of Rollups, Arbitrum Sidechains will be waiting and ready to help.
While the idea to switch between channels and Rollup to get the best of both worlds is conceptually simple, getting the details right and making sure that the switch does not introduce any attack vectors is highly non-trivial and has been the subject of years of our research (indeed, we were working on this design for years before the term Rollup was even coined).
12. How Arbitrum compares
We include a comparison to several other categories as well as specific projects when appropriate. and explain why we believe that Arbitrum is best suited for Reddit's purposes. We focus our attention on other Ethereum projects.
Payment only Rollups. Compared to Arbitrum Rollup, ZK-Rollups and other Rollups that only support token transfers have several disadvantages:
  • As outlined throughout the proposal, we believe that the entire draw of Ethereum is in its rich smart contracts support which is simply not achievable with today's zero-knowledge proof technology. Indeed, scaling with a ZK-Rollup will add friction to the deployment of smart contracts that interact with Community Points as users will have to withdraw their coins from the ZK-Rollup and transfer them to a smart contract system (like Arbitrum). The community will be best served if Reddit builds on a platform that has built-in, frictionless smart-contract support.
  • All other Rollup protocols of which we are aware employ a centralized operator. While it's true that users retain custody of their coins, the centralized operator can often profit from censoring, reordering, or delaying transactions. A common misconception is that since they're non-custodial protocols, a centralized sequencer does not pose a risk but this is incorrect as the sequencer can wreak havoc or shake down users for side payments without directly stealing funds.
  • Sidechain type protocols can eliminate some of these issues, but they are not trustless. Instead, they require trust in some quorum of a committee, often requiring two-third of the committee to be honest, compared to rollup protocols like Arbitrum that require only a single honest party. In addition, not all sidechain type protocols have committees that are diverse, or even non-centralized, in practice.
  • Plasma-style protocols have a centralized operator and do not support general smart contracts.
13. Concluding Remarks
While it's ultimately up to the judges’ palate, we believe that Arbitrum Rollup is the bakeoff choice that Reddit kneads. We far surpass Reddit's specified workload requirement at present, have much room to optimize Arbitrum Rollup in the near term, and have a clear path to get Reddit to hundreds of millions of users. Furthermore, we are the only project that gives developers and users the identical interface as the Ethereum blockchain and is fully interoperable and tooling-compatible, and we do this all without any new trust assumptions or centralized components.
But no matter how the cookie crumbles, we're glad to have participated in this bake-off and we thank you for your consideration.
About Offchain Labs
Offchain Labs, Inc. is a venture-funded New York company that spun out of Princeton University research, and is building the Arbitrum platform to usher in the next generation of scalable, interoperable, and compatible smart contracts. Offchain Labs is backed by Pantera Capital, Compound VC, Coinbase Ventures, and others.
Leadership Team
Ed Felten
Ed Felten is Co-founder and Chief Scientist at Offchain Labs. He is on leave from Princeton University, where he is the Robert E. Kahn Professor of Computer Science and Public Affairs. From 2015 to 2017 he served at the White House as Deputy United States Chief Technology Officer and senior advisor to the President. He is an ACM Fellow and member of the National Academy of Engineering. Outside of work, he is an avid runner, cook, and L.A. Dodgers fan.
Steven Goldfeder
Steven Goldfeder is Co-founder and Chief Executive Officer at Offchain Labs. He holds a PhD from Princeton University, where he worked at the intersection of cryptography and cryptocurrencies including threshold cryptography, zero-knowledge proof systems, and post-quantum signatures. He is a co-author of Bitcoin and Cryptocurrency Technologies, the leading textbook on cryptocurrencies, and he has previously worked at Google and Microsoft Research, where he co-invented the Picnic signature algorithm. When not working, you can find Steven spending time with his family, taking a nature walk, or twisting balloons.
Harry Kalodner
Harry Kalodner is Co-founder and Chief Technology Officer at Offchain Labs where he leads the engineering team. Before the company he attended Princeton as a Ph.D candidate where his research explored economics, anonymity, and incentive compatibility of cryptocurrencies, and he also has worked at Apple. When not up at 3:00am writing code, Harry occasionally sleeps.
submitted by hkalodner to ethereum [link] [comments]

How much does it cost to develop a cryptowallet for business?

How much does it cost to develop a cryptowallet for business?
A cryptocurrency wallet is specific software that allows you to make global non-cash payments and keep your profit securely stored. There are multiple reasons why business owners switch to cryptocurrency wallets such as no government invasion, multi-currency operations, quickness, no physical currency involved. However, it is necessary to develop your personalized wallet if you want to scale your business and simplify financial transactions. In this article, we will discuss what is the average price of cryptowallet development and how it will benefit your business.
https://preview.redd.it/wxe1e9l5n5r51.jpg?width=2508&format=pjpg&auto=webp&s=5c0b9b94aba2bfe8f877b7aa3f27a0f0592ab5ce
Firstly, it is important to understand the necessity of cryptowallet for entrepreneurs:
  • some transactions require a long waiting period and verification in the bank:
  • high fees on international transactions and unprofitable currency exchange rate;
  • lack of privacy, since online money transfer through a bank is impossible without the provision of personal information;
How does cryptowallet work?
  • fast and secure transactions carried within a few minutes;
  • private keys are safely stored and the transaction is processed between blockchain network members:
  • transaction fees are relatively low in comparison with a bank;
  • a completely anonymous environment;
You should keep in mind a few things that will influence the cost before the development process
Wallet type
There are two main wallet types: the desktop (installed on the PC) and the mobile app that can provide users with constant access to their funds.
Bitcoin libraries
You can either create a cryptocurrency wallet using one of the libraries (e.g. Coinbase, BitcoinJ) for Android and iOS and synchronize it with various API’s or create an application from the scratch.
Size of the development company
If you decide to get a highly customized wallet app, the estimated price will largely depend on the size of the company you are choosing. Anyway, cryptowallet development requires large investments and even hiring a small-sized company will cost you from $15,000-$20,000. The pricing depends on the features included. Also, the type of coins you want to use in your wallet app is a factor that influences the cost. Since it is not possible to calculate the exact cost of development, we will present the average prices of the basic features that are compulsory in your app:
Backend development from $10,000
Design from $7,000
Web/Desktop $7,000
Also, you can add numerous features to secure and vary your transactions:
Secured authentication & authorization, Windows/Linux/Mac wallet, iOS app, Android app, push notifications, QR code scanner, customer support, multiple cryptocurrency, optional password protection etc.
The development of a cryptocurrency wallet is an innovative tool that can bring your business to the next level. Evercode Lab developed a unique multi-currency crypto wallets (Atomic Wallet and Guarda), guaranteeing the fastest transactions, maximum security, and anonymity. Our company provides a wide range of services from consulting to a full-time development team as well as crypto asset security.
submitted by Fantastic_Tour_6829 to u/Fantastic_Tour_6829 [link] [comments]

Bittrex Review: One of the First Crypto Exchanges| Final Part

Bittrex Review: One of the First Crypto Exchanges| Final Part

4. Transaction Fees

Transferring funds across the blockchain and withdrawing them from Bittrex costs a fee for customers, with the rate unique for every coin.
Bittrex Global charges no commission for deposits. Please keep in mind that some tokens or cash may be required to perform a transaction by a crypto coin or token’s community. Bittrex crypto exchange can’t keep away from it.
Every token or coin has a blockchain transaction fee that is built in it, and the Bittrex fee is a small amount to cover this charge. You can view the fee percentage for every coin or token by clicking Withdrawal near to the coin. There you will see a transaction fee you will be charged for withdrawing a specific coin or token.
In the example below, the withdrawal fee amounts to 1 USDT
https://preview.redd.it/209uz2p64zh51.jpg?width=974&format=pjpg&auto=webp&s=9ee9355c4d75d41931a3073b8a230bd1ffddaf08
The transaction fee for Bitcoin came to 0.00050000 BTC
https://preview.redd.it/vh7zbe884zh51.jpg?width=974&format=pjpg&auto=webp&s=e6293650b46a7e0ba661478bd2467471b8b213f9

5. Trading Fees

The fee schedule below provides the applicable rate based on the account's 30-Day Volume and if the order is a maker or taker.
Bittrex Global Fee30 Day Volume (USD)MakerTaker$0k - $50k0.2%0.2%$50k - $1M0.12%0.18%$1M - $10M0.05%0.15%$10M - $60M0.02%0.1%$60M+0%0.08%>$100MContact TAM representative
Trading expenses are incurred when an order is prepared by means of the Bittrex worldwide matching engine. While an order is being executed, the purchaser and the vendor are charged a rate primarily based on the order’s amount. The fee charged by Bittrex exchange is calculated by the formula amount * buy rate * fee. There aren't any charges for placing an order which is not being executed so far. Any portion of an unfinished order will be refunded completely upon order cancelation.
Prices vary depending on the currency pair, monthly trade volume, and whether the order is a maker or taker. Bittrex reserves the right to alternate fee quotes at any time, including offering various discounts and incentive packages.

Monthly Volume

Your buying and selling volume affects the fee you pay for every order. Our expenses are built to encourage customers who ensure liquidity in the Bittrex crypto exchange markets. Your buying and selling charges are reduced according to your trade volume for the last 30 years in dollars.
Bittrex calculates the 30-day value every day, updating every account's volume calculation and buying and selling charge between of 12:30 AM UTC and 01:30 AM UTC every day.
You can check your monthly trade volume by logging in and opening Account > My Activity.
https://preview.redd.it/n1djh2ob4zh51.jpg?width=974&format=pjpg&auto=webp&s=2eebb9c9ac63de207c4dd2e49bc45aeb53a8dec8

6. Withdrawing Funds

Withdrawing any type of funds is likewise simple. You can profit by buying and selling Bitcoin, Ether, or any other cryptocurrency.
You determine the crypto address—to which the amount will be credited—and the transaction amount. The withdrawal fee will be automatically calculated and shown right away.
After confirming the transaction, the finances will be sent to the specified addresses and all that you need to do is to wait for the community to confirm the transaction.
If the 2FA is enabled, then the user receives a special code (via SMS or application) to confirm the withdrawal.

7. How to Trade on Bittrex Global

Currency selling and buying transactions are performed using the Sell and Buy buttons, accordingly.
To begin with, the dealer selects a currency pair and sees a graph of the rate dynamics and different values for the pair.
Below the chart, there is a section with orders where the user can buy or sell a virtual asset.
To create an order, you just need to specify the order type, price, and quantity. And do not forget about the 0.25% trade fee whatever the quantity.
For optimum profit, stay with liquid assets as they can be quickly sold at a near-market rate effective at the time of the transaction. Bittrex offers no referral program; so buying and selling crypto is the easiest way to earn.
https://preview.redd.it/hopm6fih4zh51.jpg?width=1302&format=pjpg&auto=webp&s=68c0aaae86f64c3e6b9d351c3df2a9c331f94038

Order Types

Bittrex helps you alternate Limit and Stop-Limit orders.
A limit order or a simple limit order is performed when the asset fee reaches—or even exceeds—the price the trader seeks. To execute such an order, it is required that there's a counter market order on the platform that has the identical fee as the limit order.

Differences between Limit Order and Stop Limit Order

A stop limit order is a mixture of a stop limit order and a limit order. In such an application, charges are indicated—a stop charge and the limit.

Stop Limit Order Purpose

https://preview.redd.it/hlxvy9ti4zh51.jpg?width=1141&format=pjpg&auto=webp&s=064a77459a4dcb4555a885cbc56629aae10fc38b

Trade Terminal

Let’s discuss how you could trade conveniently with our service.
The key features include a user-friendly interface and precise currency pair statistics (timeframe graphs, network data, trade volumes, and so forth).
The platform’s top-notch advantage is handy, easy-to-analyze, customizable charts. There is also a column for quick switching between currency pairs and an order panel beneath the fee chart. Such an all-encompassing visual solution helps compare orders efficiently and in one place.
You can use the terminal in a day or night mode; when in the night mode, the icon in the upper-right corner changes and notice the Bittrex trading terminal in night mode is displayed. The main menu consists of 4 sections: Markets, Orders, Wallets, Settings.
Markets are the trade section. Bittrex allows handling over 270 currency pairs.
Orders. To see all open orders, go to OrdersOpen.
To see completed orders, go to OrdersCompleted.
Wallets. The Wallets tab displays many wallets for all cryptocurrencies supported by the exchange and the current balance of each of them.
After refilling the balance or creating a buy or sale order, you will see all actions in the section. Bittrex allows creating a separate wallet for every coin. Additionally, you can see how the coin price has changed, in terms of percentage, throughout the day.
Here’s what you can also do with your wallets:
  • Hide zero balances: hide currencies with zero balance
  • Green and red arrows: replenish balance/withdraw funds
  • Find: search for a cryptocurrency
The Settings section helps manage your account, verification, 2FA, password modification, API connection, and many more.

How to Sell

The process of selling crypto assets follows the same algorithm. The only difference is that after choosing the exchange direction, you need to initiate a Sell order. All the rest is similar: you select the order type, specify the quantity and price, and click Sell *Currency Name* (Sell Bitcoin in our case).
If you scroll the screen, the entire history of trades and orders will be displayed below.

LONG and SHORT

You can make a long deal or a short deal. Your choice depends on whether you expect an asset to fall or rise in price.
Long positions are a classic trading method. It concerns purchasing an asset to profit when its value increases. Long positions are carried out through any brokers and do not require a margin account. In this case, the trader’s account must have enough funds to cover the transaction.
Losses in a long position are considered to be limited; no matter when the trade starts, the price will not fall below zero with all possible errors. Short positions, in contrast, are used to profit from a falling market. A trader buys a financial instrument from a broker and sells it. After the price reaches the target level, the trader buys back the assets or buys them to pay off the initial debt to the broker.
A short position yields profit if the price falls, and it is considered unprofitable the price matches the asset value. Performing a short order requires a margin account as a trader borrows valuable assets from a broker to complete a transaction. Long transactions help gain from market growth; short from a market decline.

Trade via API

Bittrex also supports algorithmic trading through extensive APIs (application programming interface), which allows you to automate the trading process using third-party services.
To create an API key, the user must enable the two-factor authentication 2FA, verify their account, and log in to the site within 3 minutes.
If all the requirements of the system are fulfilled, you can proceed to generate the API key. Log in to your Bittrex account, click Settings. Find API Keys. Click Add new key (Create a new key).
Toggle on / off settings for READ INFO, TRADE, or WITHDRAW, depending on what functionality you want to use for our API key.
Click Save and enter the 2FA code from the authenticator → Confirm.
The secret key will be displayed only once and will disappear after the page is refreshed. Make sure you saved it!
To delete an API key, click X in the right corner for the key that you want to delete, then click Save, enter the 2FA code from the authenticator and click Confirm.

Bittrex Bot, a Trader’s Assistant

Robotized programs that appeared sometimes after the appearance of cryptocurrency exchanges save users from monotonous work and allow automating the trading process.
Bots for trading digital money work like all the other bots: they perform mechanical trading according to the preset parameters.
Currently, one of Bittrex’s most popular trading bots is Bittrex Flash Crash Buyer Bot that helps traders profit from altcoin volatility without missing the right moment.
The program monitors all the market changes in the market every second; also, it even can place an order in advance. The Bittrex bot can handle a stop loss—to sell a certain amount of currency when the rate changes in a favorable direction and reaches a certain level.

8. Secure Platform

Bittrex Global employs the most reliable and effective security technologies available. There are many cases of theft, fraud. It is no coincidence that the currency is compared to the Wild West, especially if we compare the 1800s when cowboys rushed to the West Coast of America to earn and start something new in a place that had no rules.
Cryptocurrency is still wild. One can earn and lose money fast. But Bittrex has a substantial security policy thanks to the team’s huge experience in security and development for companies such as Microsoft, Amazon, Qualys, and Blackberry.
The system employs an elastic, multi-stage holding strategy to ensure that the majority of funds are kept in cold storage for extra safety.
Bittrex Global also enables the two-factor authentication for all users and provides a host of additional security features to provide multiple layers of protection.
Bittrex cold wallet: https://bitinfocharts.com/en/bitcoin/address/385cR5DM96n1HvBDMzLHPYcw89fZAXULJP

How to Pass IP Verification

To ensure higher security of your Bittrex Global account, the system requires all users to approve each new IP address through an email confirmation. This IP verification procedure is required every time you attempt to log in from a new IP Address.
Confirming your IP address.
https://preview.redd.it/rnl730z75zh51.jpg?width=971&format=pjpg&auto=webp&s=bd13fba0a844ab01cadc40003f5ea5de7439cbf9
The new IP address must be confirmed from the device that you are using to access Bittrex Global. This means that you must follow the CLICK HERE TO LOGIN link in an email on the device that you want to use to access your account.
https://preview.redd.it/tq9eje795zh51.jpg?width=607&format=pjpg&auto=webp&s=160b2ebfd1b9e0a287d4d2b99017dd45518ef2f7
To ensure even more security, Bittrex Global supports whitelisting of IP addresses and Crypto addresses. These two features can help protect the account in the event of credentials or API key loss.

How to Add IP Address to Whitelist

By setting one or more whitelisted addresses, you are telling Bittrex Global to only authorize trades or withdrawals from those IPs. This concerns both the global.bittrex.com web interface and API-based trades or withdrawals. To do this, click IP Whitelist in Site Settings.
https://preview.redd.it/m2klahja5zh51.jpg?width=971&format=pjpg&auto=webp&s=7cfb941ecb5284973baed1a2b0301459e36a0ab6

How to Add Crypto Address to Whitelist

By setting a withdrawal address, you are telling Bittrex Global to authorize withdrawals only to that address.
This concerns both the global.bittrex.com web interface and API based withdrawals.
Note that when opting into this feature, you need to specify a withdrawal address would like to withdraw funds from for every currency. To do this, click Withdrawal Whitelist in the Site Settings section. The example below shows a BTC address.
https://preview.redd.it/yrror8zd5zh51.jpg?width=974&format=pjpg&auto=webp&s=179dd7da9f6e59d3fca628cbfcd2c3962562f911

Afterword

Bittrex Global is a reliable and advanced platform for trading digital assets with a respected reputation, long history, and active market presence and development nowadays. The exchange is eligible to be used globally, including the US and its territories.
The legal component of Bittrex Global is one of the most legitimate among numerous crypto-asset exchanges.
The Bittrex team has had great ambitions and managed to deliver promises and more. The exchange staff comprises forward-thinking and exceptional individuals whose success is recognized in the traditional business and blockchain sector.
Bittrex's purpose is to be the driving force in the blockchain revolution, expanding the application, importance, and accessibility of this game-changing technology worldwide.
The exchange fosters new and innovative blockchain and related projects that could potentially change the way money and assets are managed globally.
Alongside innovation, safety will always be the main priority of the company. The platform utilizes the most reliable and effective practices and available technologies to protect user accounts. Bittrex customers have always primarily been those who appreciate the highest degree of security.
Because of the way the Bittrex trading platform is designed, it can easily scale to always provide instant order execution for any number of new customers.
Bittrex supports algorithmic trading and empowers its customers with extensive APIs for more automated and profitable trading.
One of the common features which is not available on the exchange is margin trading. No leverage used however adds up to the exchange's stability and prevents fast money seekers and risky traders from entering the exchange.
Bittrex is a force of the blockchain revolution and an important entity of the emerging sector.
The full version
First part
Second part
submitted by mPrestige to revain_org [link] [comments]

RESEARCH REPORT ABOUT KYBER NETWORK

RESEARCH REPORT ABOUT KYBER NETWORK
Author: Gamals Ahmed, CoinEx Business Ambassador

https://preview.redd.it/9k31yy1bdcg51.jpg?width=936&format=pjpg&auto=webp&s=99bcb7c3f50b272b7d97247b369848b5d8cc6053

ABSTRACT

In this research report, we present a study on Kyber Network. Kyber Network is a decentralized, on-chain liquidity protocol designed to make trading tokens simple, efficient, robust and secure.
Kyber design allows any party to contribute to an aggregated pool of liquidity within each blockchain while providing a single endpoint for takers to execute trades using the best rates available. We envision a connected liquidity network that facilitates seamless, decentralized cross-chain token swaps across Kyber based networks on different chains.
Kyber is a fully on-chain liquidity protocol that enables decentralized exchange of cryptocurrencies in any application. Liquidity providers (Reserves) are integrated into one single endpoint for takers and users. When a user requests a trade, the protocol will scan the entire network to find the reserve with the best price and take liquidity from that particular reserve.

1.INTRODUCTION

DeFi applications all need access to good liquidity sources, which is a critical component to provide good services. Currently, decentralized liquidity is comprised of various sources including DEXes (Uniswap, OasisDEX, Bancor), decentralized funds and other financial apps. The more scattered the sources, the harder it becomes for anyone to either find the best rate for their trade or to even find enough liquidity for their need.
Kyber is a blockchain-based liquidity protocol that aggregates liquidity from a wide range of reserves, powering instant and secure token exchange in any decentralized application.
The protocol allows for a wide range of implementation possibilities for liquidity providers, allowing a wide range of entities to contribute liquidity, including end users, decentralized exchanges and other decentralized protocols. On the taker side, end users, cryptocurrency wallets, and smart contracts are able to perform instant and trustless token trades at the best rates available amongst the sources.
The Kyber Network is project based on the Ethereum protocol that seeks to completely decentralize the exchange of crypto currencies and make exchange trustless by keeping everything on the blockchain.
Through the Kyber Network, users should be able to instantly convert or exchange any crypto currency.

1.1 OVERVIEW ABOUT KYBER NETWORK PROTOCOL

The Kyber Network is a decentralized way to exchange ETH and different ERC20 tokens instantly — no waiting and no registration needed.
Using this protocol, developers can build innovative payment flows and applications, including instant token swap services, ERC20 payments, and financial DApps — helping to build a world where any token is usable anywhere.
Kyber’s fully on-chain design allows for full transparency and verifiability in the matching engine, as well as seamless composability with DApps, not all of which are possible with off-chain or hybrid approaches. The integration of a large variety of liquidity providers also makes Kyber uniquely capable of supporting sophisticated schemes and catering to the needs of DeFi DApps and financial institutions. Hence, many developers leverage Kyber’s liquidity pool to build innovative financial applications, and not surprisingly, Kyber is the most used DeFi protocol in the world.
The Kyber Network is quite an established project that is trying to change the way we think of decentralised crypto currency exchange.
The Kyber Network has seen very rapid development. After being announced in May 2017 the testnet for the Kyber Network went live in August 2017. An ICO followed in September 2017, with the company raising 200,000 ETH valued at $60 million in just one day.
The live main net was released in February 2018 to whitelisted participants, and on March 19, 2018, the Kyber Network opened the main net as a public beta. Since then the network has seen increasing growth, with network volumes growing more than 500% in the first half of 2019.
Although there was a modest decrease in August 2019 that can be attributed to the price of ETH dropping by 50%, impacting the overall total volumes being traded and processed globally.
They are developing a decentralised exchange protocol that will allow developers to build payment flows and financial apps. This is indeed quite a competitive market as a number of other such protocols have been launched.
In Brief - Kyber Network is a tool that allows anyone to swap tokens instantly without having to use exchanges. - It allows vendors to accept different types of cryptocurrency while still being paid in their preferred crypto of choice. - It’s built primarily for Ethereum, but any smart-contract based blockchain can incorporate it.
At its core, Kyber is a decentralized way to exchange ETH and different ERC20 tokens instantly–no waiting and no registration needed. To do this Kyber uses a diverse set of liquidity pools, or pools of different crypto assets called “reserves” that any project can tap into or integrate with.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
All this swapping happens directly on the Ethereum blockchain, meaning every transaction is completely transparent.

1.1.1 WHY BUILD THE KYBER NETWORK?

While crypto currencies were built to be decentralized, many of the exchanges for trading crypto currencies have become centralized affairs. This has led to security vulnerabilities, with many exchanges becoming the victims of hacking and theft.
It has also led to increased fees and costs, and the centralized exchanges often come with slow transfer times as well. In some cases, wallets have been locked and users are unable to withdraw their coins.
Decentralized exchanges have popped up recently to address the flaws in the centralized exchanges, but they have their own flaws, most notably a lack of liquidity, and often times high costs to modify trades in their on-chain order books.

Some of the Integrations with Kyber Protocol
The Kyber Network was formed to provide users with a decentralized exchange that keeps everything right on the blockchain, and uses a reserve system rather than an order book to provide high liquidity at all times. This will allow for the exchange and transfer of any cryptocurrency, even cross exchanges, and costs will be kept at a minimum as well.
The Kyber Network has three guiding design philosophies since the start:
  1. To be most useful the network needs to be platform-agnostic, which allows any protocol or application the ability to take advantage of the liquidity provided by the Kyber Network without any impact on innovation.
  2. The network was designed to make real-world commerce and decentralized financial products not only possible but also feasible. It does this by allowing for instant token exchange across a wide range of tokens, and without any settlement risk.
  3. The Kyber Network was created with ease of integration as a priority, which is why everything runs fully on-chain and fully transparent. Kyber is not only developer-friendly, but is also compatible with a wide variety of systems.

1.1.2 WHO INVENTED KYBER?

Kyber’s founders are Loi Luu, Victor Tran, Yaron Velner — CEO, CTO, and advisor to the Kyber Network.

1.1.3 WHAT DISTINGUISHES KYBER?

Kyber’s mission has always been to integrate with other protocols so they’ve focused on being developer-friendly by providing architecture to allow anyone to incorporate the technology onto any smart-contract powered blockchain. As a result, a variety of different dapps, vendors, and wallets use Kyber’s infrastructure including Set Protocol, bZx, InstaDApp, and Coinbase wallet.
Besides, dapps, vendors, and wallets, Kyber also integrates with other exchanges such as Uniswap — sharing liquidity pools between the two protocols.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
Limit orders on Kyber allow users to set a specific price in which they would like to exchange a token instead of accepting whatever price currently exists at the time of trading. However, unlike with other exchanges, users never lose custody of their crypto assets during limit orders on Kyber.
The Kyber protocol works by using pools of crypto funds called “reserves”, which currently support over 70 different ERC20 tokens. Reserves are essentially smart contracts with a pool of funds. Different parties with different prices and levels of funding control all reserves. Instead of using order books to match buyers and sellers to return the best price, the Kyber protocol looks at all the reserves and returns the best price among the different reserves. Reserves make money on the “spread” or differences between the buying and selling prices. The Kyber wants any token holder to easily convert one token to another with a minimum of fuss.

1.2 KYBER PROTOCOL

The protocol smart contracts offer a single interface for the best available token exchange rates to be taken from an aggregated liquidity pool across diverse sources. ● Aggregated liquidity pool. The protocol aggregates various liquidity sources into one liquidity pool, making it easy for takers to find the best rates offered with one function call. ● Diverse sources of liquidity. The protocol allows different types of liquidity sources to be plugged into. Liquidity providers may employ different strategies and different implementations to contribute liquidity to the protocol. ● Permissionless. The protocol is designed to be permissionless where any developer can set up various types of reserves, and any end user can contribute liquidity. Implementations need to take into consideration various security vectors, such as reserve spamming, but can be mitigated through a staking mechanism. We can expect implementations to be permissioned initially until the maintainers are confident about these considerations.
The core feature that the Kyber protocol facilitates is the token swap between taker and liquidity sources. The protocol aims to provide the following properties for token trades: ● Instant Settlement. Takers do not have to wait for their orders to be fulfilled, since trade matching and settlement occurs in a single blockchain transaction. This enables trades to be part of a series of actions happening in a single smart contract function. ● Atomicity. When takers make a trade request, their trade either gets fully executed, or is reverted. This “all or nothing” aspect means that takers are not exposed to the risk of partial trade execution. ● Public rate verification. Anyone can verify the rates that are being offered by reserves and have their trades instantly settled just by querying from the smart contracts. ● Ease of integration. Trustless and atomic token trades can be directly and easily integrated into other smart contracts, thereby enabling multiple trades to be performed in a smart contract function.
How each actor works is specified in Section Network Actors. 1. Takers refer to anyone who can directly call the smart contract functions to trade tokens, such as end-users, DApps, and wallets. 2. Reserves refer to anyone who wishes to provide liquidity. They have to implement the smart contract functions defined in the reserve interface in order to be registered and have their token pairs listed. 3. Registered reserves refer to those that will be cycled through for matching taker requests. 4. Maintainers refer to anyone who has permission to access the functions for the adding/removing of reserves and token pairs, such as a DAO or the team behind the protocol implementation. 5. In all, they comprise of the network, which refers to all the actors involved in any given implementation of the protocol.
The protocol implementation needs to have the following: 1. Functions for takers to check rates and execute the trades 2. Functions for the maintainers to registeremove reserves and token pairs 3. Reserve interface that defines the functions reserves needs to implement
https://preview.redd.it/d2tcxc7wdcg51.png?width=700&format=png&auto=webp&s=b2afde388a77054e6731772b9115ee53f09b6a4a

1.3 KYBER CORE SMART CONTRACTS

Kyber Core smart contracts is an implementation of the protocol that has major protocol functions to allow actors to join and interact with the network. For example, the Kyber Core smart contracts provide functions for the listing and delisting of reserves and trading pairs by having clear interfaces for the reserves to comply to be able to register to the network and adding support for new trading pairs. In addition, the Kyber Core smart contracts also provide a function for takers to query the best rate among all the registered reserves, and perform the trades with the corresponding rate and reserve. A trading pair consists of a quote token and any other token that the reserve wishes to support. The quote token is the token that is either traded from or to for all trades. For example, the Ethereum implementation of the Kyber protocol uses Ether as the quote token.
In order to search for the best rate, all reserves supporting the requested token pair will be iterated through. Hence, the Kyber Core smart contracts need to have this search algorithm implemented.
The key functions implemented in the Kyber Core Smart Contracts are listed in Figure 2 below. We will visit and explain the implementation details and security considerations of each function in the Specification Section.

1.4 HOW KYBER’S ON-CHAIN PROTOCOL WORKS?

Kyber is the liquidity infrastructure for decentralized finance. Kyber aggregates liquidity from diverse sources into a pool, which provides the best rates for takers such as DApps, Wallets, DEXs, and End users.

1.4.1 PROVIDING LIQUIDITY AS A RESERVE

Anyone can operate a Kyber Reserve to market make for profit and make their tokens available for DApps in the ecosystem. Through an open reserve architecture, individuals, token teams and professional market makers can contribute token assets to Kyber’s liquidity pool and earn from the spread in every trade. These tokens become available at the best rates across DApps that tap into the network, making them instantly more liquid and useful.
MAIN RESERVE TYPES Kyber currently has over 45 reserves in its network providing liquidity. There are 3 main types of reserves that allow different liquidity contribution options to suit the unique needs of different providers. 1. Automated Price Reserves (APR) — Allows token teams and users with large token holdings to have an automated yet customized pricing system with low maintenance costs. Synthetix and Melon are examples of teams that run APRs. 2. Fed Price Reserves (FPR) — Operated by professional market makers that require custom and advanced pricing strategies tailored to their specific needs. Kyber alongside reserves such as OneBit, runs FPRs. 3. Bridge Reserves (BR) — These are specialized reserves meant to bring liquidity from other on-chain liquidity providers like Uniswap, Oasis, DutchX, and Bancor into the network.

1.5 KYBER NETWORK ROLES

There Kyber Network functions through coordination between several different roles and functions as explained below: - Users — This entity uses the Kyber Network to send and receive tokens. A user can be an individual, a merchant, and even a smart contract account. - Reserve Entities — This role is used to add liquidity to the platform through the dynamic reserve pool. Some reserve entities are internal to the Kyber Network, but others may be registered third parties. Reserve entities may be public if the public contributes to the reserves they hold, otherwise they are considered private. By allowing third parties as reserve entities the network adds diversity, which prevents monopolization and keeps exchange rates competitive. Allowing third party reserve entities also allows for the listing of less popular coins with lower volumes. - Reserve Contributors — Where reserve entities are classified as public, the reserve contributor is the entity providing reserve funds. Their incentive for doing so is a profit share from the reserve. - The Reserve Manager — Maintains the reserve, calculates exchange rates and enters them into the network. The reserve manager profits from exchange spreads set by them on their reserves. They can also benefit from increasing volume by accessing the entire Kyber Network. - The Kyber Network Operator — Currently the Kyber Network team is filling the role of the network operator, which has a function to adds/remove Reserve Entities as well as controlling the listing of tokens. Eventually, this role will revert to a proper decentralized governance.

1.6 BASIC TOKEN TRADE

A basic token trade is one that has the quote token as either the source or destination token of the trade request. The execution flow of a basic token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for ETH as an example. The trade happens in a single blockchain transaction. 1. Taker sends 1 ETH to the protocol contract, and would like to receive BAT in return. 2. Protocol contract queries the first reserve for its ETH to BAT exchange rate. 3. Reserve 1 offers an exchange rate of 1 ETH for 800 BAT. 4. Protocol contract queries the second reserve for its ETH to BAT exchange rate. 5. Reserve 2 offers an exchange rate of 1 ETH for 820 BAT. 6. This process goes on for the other reserves. After the iteration, reserve 2 is discovered to have offered the best ETH to BAT exchange rate. 7. Protocol contract sends 1 ETH to reserve 2. 8. The reserve sends 820 BAT to the taker.

1.7 TOKEN-TO-TOKEN TRADE

A token-to-token trade is one where the quote token is neither the source nor the destination token of the trade request. The exchange flow of a token to token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for DAI as an example. The trade happens in a single blockchain transaction. 1. Taker sends 50 BAT to the protocol contract, and would like to receive DAI in return. 2. Protocol contract sends 50 BAT to the reserve offering the best BAT to ETH rate. 3. Protocol contract receives 1 ETH in return. 4. Protocol contract sends 1 ETH to the reserve offering the best ETH to DAI rate. 5. Protocol contract receives 30 DAI in return. 6. Protocol contract sends 30 DAI to the user.

2.KYBER NETWORK CRYSTAL (KNC) TOKEN

Kyber Network Crystal (KNC) is an ERC-20 utility token and an integral part of Kyber Network.
KNC is the first deflationary staking token where staking rewards and token burns are generated from actual network usage and growth in DeFi.
The Kyber Network Crystal (KNC) is the backbone of the Kyber Network. It works to connect liquidity providers and those who need liquidity and serves three distinct purposes. The first of these is to collect transaction fees, and a portion of every fee collected is burned, which keeps KNC deflationary. Kyber Network Crystals (KNC), are named after the crystals in Star Wars used to power light sabers.
The KNC also ensures the smooth operation of the reserve system in the Kyber liquidity since entities must use third-party tokens to buy the KNC that pays for their operations in the network.
KNC allows token holders to play a critical role in determining the incentive system, building a wide base of stakeholders, and facilitating economic flow in the network. A small fee is charged each time a token exchange happens on the network, and KNC holders get to vote on this fee model and distribution, as well as other important decisions. Over time, as more trades are executed, additional fees will be generated for staking rewards and reserve rebates, while more KNC will be burned. - Participation rewards — KNC holders can stake KNC in the KyberDAO and vote on key parameters. Voters will earn staking rewards (in ETH) - Burning — Some of the network fees will be burned to reduce KNC supply permanently, providing long-term value accrual from decreasing supply. - Reserve incentives — KNC holders determine the portion of network fees that are used as rebates for selected liquidity providers (reserves) based on their volume performance.

Finally, the KNC token is the connection between the Kyber Network and the exchanges, wallets, and dApps that leverage the liquidity network. This is a virtuous system since entities are rewarded with referral fees for directing more users to the Kyber Network, which helps increase adoption for Kyber and for the entities using the Network.
And of course there will soon be a fourth and fifth uses for the KNC, which will be as a staking token used to generate passive income, as well as a governance token used to vote on key parameters of the network.
The Kyber Network Crystal (KNC) was released in a September 2017 ICO at a price around $1. There were 226,000,000 KNC minted for the ICO, with 61% sold to the public. The remaining 39% are controlled 50/50 by the company and the founders/advisors, with a 1 year lockup period and 2 year vesting period.
Currently, just over 180 million coins are in circulation, and the total supply has been reduced to 210.94 million after the company burned 1 millionth KNC token in May 2019 and then its second millionth KNC token just three months later.
That means that while it took 15 months to burn the first million KNC, it took just 10 weeks to burn the second million KNC. That shows how rapidly adoption has been growing recently for Kyber, with July 2019 USD trading volumes on the Kyber Network nearly reaching $60 million. This volume has continued growing, and on march 13, 2020 the network experienced its highest daily trading activity of $33.7 million in a 24-hour period.
Currently KNC is required by Reserve Managers to operate on the network, which ensures a minimum amount of demand for the token. Combined with future plans for burning coins, price is expected to maintain an upward bias, although it has suffered along with the broader market in 2018 and more recently during the summer of 2019.
It was unfortunate in 2020 that a beginning rally was cut short by the coronavirus pandemic, although the token has stabilized as of April 2020, and there are hopes the rally could resume in the summer of 2020.

2.1 HOW ARE KNC TOKENS PRODUCED?

The native token of Kyber is called Kyber Network Crystals (KNC). All reserves are required to pay fees in KNC for the right to manage reserves. The KNC collected as fees are either burned and taken out of the total supply or awarded to integrated dapps as an incentive to help them grow.

2.2 HOW DO YOU GET HOLD OF KNC TOKENS?

Kyber Swap can be used to buy ETH directly using a credit card, which can then be used to swap for KNC. Besides Kyber itself, exchanges such as Binance, Huobi, and OKex trade KNC.

2.3 WHAT CAN YOU DO WITH KYBER?

The most direct and basic function of Kyber is for instantly swapping tokens without registering an account, which anyone can do using an Etheruem wallet such as MetaMask. Users can also create their own reserves and contribute funds to a reserve, but that process is still fairly technical one–something Kyber is working on making easier for users in the future.

2.4 THE GOAL OF KYBER THE FUTURE

The goal of Kyber in the coming years is to solidify its position as a one-stop solution for powering liquidity and token swapping on Ethereum. Kyber plans on a major protocol upgrade called Katalyst, which will create new incentives and growth opportunities for all stakeholders in their ecosystem, especially KNC holders. The upgrade will mean more use cases for KNC including to use KNC to vote on governance decisions through a decentralized organization (DAO) called the KyberDAO.
With our upcoming Katalyst protocol upgrade and new KNC model, Kyber will provide even more benefits for stakeholders. For instance, reserves will no longer need to hold a KNC balance for fees, removing a major friction point, and there will be rebates for top performing reserves. KNC holders can also stake their KNC to participate in governance and receive rewards.

2.5 BUYING & STORING KNC

Those interested in buying KNC tokens can do so at a number of exchanges. Perhaps your best bet between the complete list is the likes of Coinbase Pro and Binance. The former is based in the USA whereas the latter is an offshore exchange.
The trading volume is well spread out at these exchanges, which means that the liquidity is not concentrated and dependent on any one exchange. You also have decent liquidity on each of the exchange books. For example, the Binance BTC / KNC books are wide and there is decent turnover. This means easier order execution.
KNC is an ERC20 token and can be stored in any wallet with ERC20 support, such as MyEtherWallet or MetaMask. One interesting alternative is the KyberSwap Android mobile app that was released in August 2019.
It allows for instant swapping of tokens and has support for over 70 different altcoins. It also allows users to set price alerts and limit orders and works as a full-featured Ethereum wallet.

2.6 KYBER KATALYST UPGRADE

Kyber has announced their intention to become the de facto liquidity layer for the Decentralized Finance space, aiming to have Kyber as the single on-chain endpoint used by the majority of liquidity providers and dApp developers. In order to achieve this goal the Kyber Network team is looking to create an open ecosystem that garners trust from the decentralized finance space. They believe this is the path that will lead the majority of projects, developers, and users to choose Kyber for liquidity needs. With that in mind they have recently announced the launch of a protocol upgrade to Kyber which is being called Katalyst.
The Katalyst upgrade will create a stronger ecosystem by creating strong alignments towards a common goal, while also strengthening the incentives for stakeholders to participate in the ecosystem.
The primary beneficiaries of the Katalyst upgrade will be the three major Kyber stakeholders: 1. Reserve managers who provide network liquidity; 2. dApps that connect takers to Kyber; 3. KNC holders.
These stakeholders can expect to see benefits as highlighted below: Reserve Managers will see two new benefits to providing liquidity for the network. The first of these benefits will be incentives for providing reserves. Once Katalyst is implemented part of the fees collected will go to the reserve managers as an incentive for providing liquidity.
This mechanism is similar to rebates in traditional finance, and is expected to drive the creation of additional reserves and market making, which in turn will lead to greater liquidity and platform reach.
Katalyst will also do away with the need for reserve managers to maintain a KNC balance for use as network fees. Instead fees will be automatically collected and used as incentives or burned as appropriate. This should remove a great deal of friction for reserves to connect with Kyber without affecting the competitive exchange rates that takers in the system enjoy. dApp Integrators will now be able to set their own spread, which will give them full control over their own business model. This means the current fee sharing program that shares 30% of the 0.25% fee with dApp developers will go away and developers will determine their own spread. It’s believed this will increase dApp development within Kyber as developers will now be in control of fees.
KNC Holders, often thought of as the core of the Kyber Network, will be able to take advantage of a new staking mechanism that will allow them to receive a portion of network fees by staking their KNC and participating in the KyberDAO.

2.7 COMING KYBERDAO

With the implementation of the Katalyst protocol the KNC holders will be put right at the heart of Kyber. Holders of KNC tokens will now have a critical role to play in determining the future economic flow of the network, including its incentive systems.
The primary way this will be achieved is through KyberDAO, a way in which on-chain and off-chain governance will align to streamline cooperation between the Kyber team, KNC holders, and market participants.
The Kyber Network team has identified 3 key areas of consideration for the KyberDAO: 1. Broad representation, transparent governance and network stability 2. Strong incentives for KNC holders to maintain their stake and be highly involved in governance 3. Maximizing participation with a wide range of options for voting delegation
Interaction between KNC Holders & Kyber
This means KNC holders have been empowered to determine the network fee and how to allocate the fees to ensure maximum network growth. KNC holders will now have three fee allocation options to vote on: - Voting Rewards: Immediate value creation. Holders who stake and participate in the KyberDAO get their share of the fees designated for rewards. - Burning: Long term value accrual. The decreasing supply of KNC will improve the token appreciation over time and benefit those who did not participate. - Reserve Incentives:Value creation via network growth. By rewarding Kyber reserve managers based on their performance, it helps to drive greater volume, value, and network fees.

2.8 TRANSPARENCY AND STABILITY

The design of the KyberDAO is meant to allow for the greatest network stability, as well as maximum transparency and the ability to quickly recover in emergency situations. Initally the Kyber team will remain as maintainers of the KyberDAO. The system is being developed to be as verifiable as possible, while still maintaining maximum transparency regarding the role of the maintainer in the DAO.
Part of this transparency means that all data and processes are stored on-chain if feasible. Voting regarding network fees and allocations will be done on-chain and will be immutable. In situations where on-chain storage or execution is not feasible there will be a set of off-chain governance processes developed to ensure all decisions are followed through on.

2.9 KNC STAKING AND DELEGATION

Staking will be a new addition and both staking and voting will be done in fixed periods of times called “epochs”. These epochs will be measured in Ethereum block times, and each KyberDAO epoch will last roughly 2 weeks.
This is a relatively rapid epoch and it is beneficial in that it gives more rapid DAO conclusion and decision-making, while also conferring faster reward distribution. On the downside it means there needs to be a new voting campaign every two weeks, which requires more frequent participation from KNC stakeholders, as well as more work from the Kyber team.
Delegation will be part of the protocol, allowing stakers to delegate their voting rights to third-party pools or other entities. The pools receiving the delegation rights will be free to determine their own fee structure and voting decisions. Because the pools will share in rewards, and because their voting decisions will be clearly visible on-chain, it is expected that they will continue to work to the benefit of the network.

3. TRADING

After the September 2017 ICO, KNC settled into a trading price that hovered around $1.00 (decreasing in BTC value) until December. The token has followed the trend of most other altcoins — rising in price through December and sharply declining toward the beginning of January 2018.
The KNC price fell throughout all of 2018 with one exception during April. From April 6th to April 28th, the price rose over 200 percent. This run-up coincided with a blog post outlining plans to bring Bitcoin to the Ethereum blockchain. Since then, however, the price has steadily fallen, currently resting on what looks like a $0.15 (~0.000045 BTC) floor.
With the number of partners using the Kyber Network, the price may rise as they begin to fully use the network. The development team has consistently hit the milestones they’ve set out to achieve, so make note of any release announcements on the horizon.

4. COMPETITION

The 0x project is the biggest competitor to Kyber Network. Both teams are attempting to enter the decentralized exchange market. The primary difference between the two is that Kyber performs the entire exchange process on-chain while 0x keeps the order book and matching off-chain.
As a crypto swap exchange, the platform also competes with ShapeShift and Changelly.

5.KYBER MILESTONES

• June 2020: Digifox, an all-in-one finance application by popular crypto trader and Youtuber Nicholas Merten a.k.a DataDash (340K subs), integrated Kyber to enable users to easily swap between cryptocurrencies without having to leave the application. • June 2020: Stake Capital partnered with Kyber to provide convenient KNC staking and delegation services, and also took a KNC position to participate in governance. • June 2020: Outlined the benefits of the Fed Price Reserve (FPR) for professional market makers and advanced developers. • May 2020: Kyber crossed US$1 Billion in total trading volume and 1 Million transactions, performed entirely on-chain on Ethereum. • May 2020: StakeWith.Us partnered Kyber Network as a KyberDAO Pool Master. • May 2020: 2Key, a popular blockchain referral solution using smart links, integrated Kyber’s on-chain liquidity protocol for seamless token swaps • May 2020: Blockchain game League of Kingdoms integrated Kyber to accept Token Payments for Land NFTs. • May 2020: Joined the Zcash Developer Alliance , an invite-only working group to advance Zcash development and interoperability. • May 2020: Joined the Chicago DeFi Alliance to help accelerate on-chain market making for professionals and developers. • March 2020: Set a new record of USD $33.7M in 24H fully on-chain trading volume, and $190M in 30 day on-chain trading volume. • March 2020: Integrated by Rarible, Bullionix, and Unstoppable Domains, with the KyberWidget deployed on IPFS, which allows anyone to swap tokens through Kyber without being blocked. • February 2020: Popular Ethereum blockchain game Axie Infinity integrated Kyber to accept ERC20 payments for NFT game items. • February 2020: Kyber’s protocol was integrated by Gelato Finance, Idle Finance, rTrees, Sablier, and 0x API for their liquidity needs. • January 2020: Kyber Network was found to be the most used protocol in the whole decentralized finance (DeFi) space in 2019, according to a DeFi research report by Binance. • December 2019: Switcheo integrated Kyber’s protocol for enhanced liquidity on their own DEX. • December 2019: DeFi Wallet Eidoo integrated Kyber for seamless in-wallet token swaps. • December 2019: Announced the development of the Katalyst Protocol Upgrade and new KNC token model. • July 2019: Developed the Waterloo Bridge , a Decentralized Practical Cross-chain Bridge between EOS and Ethereum, successfully demonstrating a token swap between Ethereum to EOS. • July 2019: Trust Wallet, the official Binance wallet, integrated Kyber as part of its decentralized token exchange service, allowing even more seamless in-wallet token swaps for thousands of users around the world. • May 2019: HTC, the large consumer electronics company with more than 20 years of innovation, integrated Kyber into its Zion Vault Wallet on EXODUS 1 , the first native web 3.0 blockchain phone, allowing users to easily swap between cryptocurrencies in a decentralized manner without leaving the wallet. • January 2019: Introduced the Automated Price Reserve (APR) , a capital efficient way for token teams and individuals to market make with low slippage. • January 2019: The popular Enjin Wallet, a default blockchain DApp on the Samsung S10 and S20 mobile phones, integrated Kyber to enable in-wallet token swaps. • October 2018: Kyber was a founding member of the WBTC (Wrapped Bitcoin) Initiative and DAO. • October 2018: Developed the KyberWidget for ERC20 token swaps on any website, with CoinGecko being the first major project to use it on their popular site.

Full Article

submitted by CoinEx_Institution to kybernetwork [link] [comments]

BitFinex API Tutorial How To Find Bitcoin Wallet Private Key In Trust Wallet ... What are API Keys?  Using API Keys - YouTube What is an API? - YouTube What is Bitcoin Mining? (In Plain English) - YouTube

A tool for brute-forcing Bitcoin private keys. The main purpose of this project is to contribute to the effort of solving the Bitcoin puzzle transaction: A transaction with 32 addresses that become increasingly difficult to crack. Using BitCrack Usage. Use cuBitCrack.exe for CUDA devices and clBitCrack.exe for OpenCL devices. Create a new API Key pop-up. STEP 3: Use API Key to retrieve data from the CryptoCompare APIs. You can view the API key information. Click the 'copy' button to copy the API key to your clipboard. If you'd like to view the API key in plain text, click the eye icon next to copy. To test your API Key, click 'use key' to see the API Key used in action. Accurate Bitcoin mining calculator trusted by millions of cryptocurrency miners since May 2013 - developed by an OG Bitcoin miner looking to maximize on mining profits and calculate ROI for new ASIC miners. Updated in 2020, the newest version of the Bitcoin mining calculator makes it simple and easy to quickly calculate mining profitability for your Bitcoin mining hardware. Some API calls are available with CORS headers if you add a &cors=true paramter to the GET request . URL: https://blockchain.info/ticker No Parameters. Returns a JSON object with the currency codes as keys. "15m" is the 15 minutes delayed market price, "last" is the most recent market price, "symbol" is the currency symbol. Service uses two different API key s: . Receive Payments V2 API KEY: an easy way for websites to receive payments in bitcoins. This option is completely free and safe. It is ideal for business and personal using. Blockchain Wallet API KEY: full access to all functions of this service like creating a wallet, making payments, sending transactions, address management and so on.

[index] [33378] [19292] [41623] [36612] [4032] [6511] [31855] [17438] [47038] [22465]

BitFinex API Tutorial

Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. Wallets in cryptocurrency work in a weird way. They also have some weird properties like: they can be created offline and be used directly. Whut? Let's see h... Support the channel with a Bitcoin donation - 1BcYJCVfU9imPKTrqhdVpmUfweAo9fT3U9 Keep your crypto safe with an offline wallet (cold wallet) - Ledger Nano S (... You always dream of finding software to decrypt the private key of some Bitcoin addresses. Here you are the best private key decryption software. the bitcoin... Start trading Bitcoin and cryptocurrency here: http://bit.ly/2Vptr2X Bitcoin mining is the process of updating the ledger of Bitcoin transactions known as th...

#